Shore Durometer

SMT-MESSZEUGE Digital Shore hardness tester, Shore A durometer
SOLD OUT
Digital Shore hardness tester, Shore A durometer
Order-No. 936.100A
  • Digital Shore Durometer Type A (Shore A measuring method)
  • with flat cone point Ø 79 mm 35° (tip shape A)
  • Can be used for normal rubber, soft plastics, elastomers, neoprene, silicone, vinyl, felt, leather, etc.
  • digital LCD with large reading digits
  • digital reading 0.5 HA
  • measuring range 0 - 100 HA
  • accuracy to factory standard 2 HA
  • ON/OFF Button
  • HOLD Button (measured value fixing)
  • ZERO Button (Zero setting)
  • with button cell CR 2032 Voltage 3V (measuring system 3V)
  • in case / box
99,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Digital Shore AO durometer
Digital Shore hardness tester, Shore AO durometer
Order-No. 936.100C
  • Digital Shore Durometer Type AO (Shore AO measuring method)
  • with spherical 2.5 mm (tip shape C)
  • applicable, e.g., for foams, sponges, etc.
  • digital LCD with large reading digits
  • digital Reading 0.5 HC
  • measuring range 0 - 100 HC
  • accuracy according to factory standard 2 HC
  • ON/OFF Button
  • HOLD Button (measured value fixing)
  • ZERO Button (Zero setting)
  • with button cell CR 2032 Voltage 3V (measuring system 3V)
  • in case / box
99,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Digital Shore D durometer
Digital Shore hardness tester, Shore D durometer
Order-No. 936.100D
  • Digital Shore Durometer Type D (Shore D measuring method)
  • with sharp cone point 30° SR 0.1 mm (tip shape D)
  • applicable, e.g., for plastics, synthetic resin, epoxy, plexiglass, etc.
  • digital LCD with large reading digits
  • digital Reading 0.5 HD
  • measuring range 0 - 100 HD
  • accuracy according to factory standard 2 HD
  • ON/OFF Button
  • HOLD Button (measured value fixing)
  • ZERO Button (Zero setting)
  • with button cell CR 2032 Voltage 3V (measuring system 3V)
  • in case / box
99,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Comparison plate set for Shore durometer A + AO
NEW
Comparison plate set for Shore durometer A + AO
Order-No. 936.101A-AO
  • for checking the actual condition of Shore durometers (hardness testers)
    with type A or AO (not suitable for durometer calibration)
  • 7 test samples with nominal hardness:
    36, 42, 55, 67, 75, 85, 94 HA (± 2)
  • in storage box
86,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Comparison plate set for Shore durometer D
NEW
Comparison plate set for Shore durometer D
Order-No. 936.101D
  • for checking the actual condition of Shore durometers (hardness testers)
    with type D (not suitable for durometer calibration)
  • 3 test samples with nominal hardness:
    33, 49, 92 HD (± 2)
  • in storage box
65,00 EUR
plus 19% tax excl. Shipping costs
1 to 5 (from a total of 5)