NEW in the Measuring Tools shop

Roll Gauge with chromed steel disc
NEW
Order-No. 676.000
  • Rolling Gauge / Roll Gauge / Disc Gauge 
  • with satin chromed steel disc
  • mm graduation on both sides
  • reading 1 mm
  • circumference of the steel disc 500 mm
  • with stable wooden handle
  • weight approx. 0,480 kg

Quality " Made in Germany " from SMT-MESSZEUGE

For quick measurements for boiler makers and shipyards
in apparatus engineering etc.

Use and reading of the Roll Gauge (Disc Gauge)

The roll gauge is placed at the "0" (hole) at the beginning of the measuring section
and then unrolled to the desired end of the measurement .
Correspondingly all the turns count and add the remaining millimeters.

Example:

2 turns ( 1 turn / circumference 500 mm ) + the remaining millimeters e.g. 225 mm =
2 x 500 + 225 = 1225 mm total distance

159,00 EUR
plus 19% tax excl. Shipping costs
Prism pair V-Block 75 x 40 x 40 mm to DIN 876/0
Order-No. 871.551
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 90° groove angle for shaft Ø 5 - 40 mm
  • dimensions: L (length) x W (width) x H (height) = 75 x 40 x 40 mm
  • accuracy according to DIN 876/0 = 0,008 mm
  • weight 1,6 kg
  • delivery always pairwise
57,00 EUR
plus 19% tax excl. Shipping costs
Prism pair V-Block 100 x 45 x 45 mm to DIN 876/0
Order-No. 871.552
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 90° groove angle for shaft Ø 6 - 45 mm
  • dimensions: L (length) x W (width) x H (height) = 100 x 45 x 45 mm
  • accuracy according to DIN 876/0 = 0,008 mm
  • weight 2,8 kg
  • delivery always pairwise
74,00 EUR
plus 19% tax excl. Shipping costs
Prism pair V-Block 150 x 55 x 55 mm to DIN 876/0
Order-No. 871.553
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 90° groove angle for shaft Ø 8 - 55 mm
  • dimensions: L (length) x W (width) x H (height) = 150 x 55 x 55 mm
  • accuracy according to DIN 876/0 = 0,008 mm
  • weight 6 kg
  • delivery always pairwise
124,00 EUR
plus 19% tax excl. Shipping costs
Triple prism pair 50x19x24 mm for shaft Ø 5-33 mm
Order-No. 873.005
  • Triple V-Blocks
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 3x90° vee groove for shaft Ø 5 - 33 mm
  • dimensions: L (length) x W (width) x H (height) = 50 x 19 x 24 mm
  • accuracy according to factory standard 0,02 mm
  • weight 0,3 kg
  • delivery always pairwise
55,00 EUR
plus 19% tax excl. Shipping costs
Triple prism pair 75x24x35 mm for shaft Ø 6-45 mm
NEW
Order-No. 873.007
  • Triple V-Blocks
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 3x90° vee groove for shaft Ø 6 - 45 mm
  • dimensions: L (length) x W (width) x H (height) = 75 x 24 x 35 mm
  • accuracy according to factory standard 0,02 mm
  • weight 0,4 kg
  • delivery always pairwise
85,00 EUR
plus 19% tax excl. Shipping costs
Triple prism pair 100x33x52 mm for shaft Ø 8-60 mm
Order-No. 873.010
  • Triple V-Blocks
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 3x90° vee groove for shaft Ø 8 - 60 mm
  • dimensions: L (length) x W (width) x H (height) = 100 x 33 x 52 mm
  • accuracy according to factory standard 0,02 mm
  • weight 0,6 kg
  • delivery always pairwise
99,00 EUR
plus 19% tax excl. Shipping costs
Triple prism pair 125x44x69 mm for shaft Ø 8-75 mm
Order-No. 873.017
  • Triple V-Blocks
  • made of special steel
  • hardened and ground
  • pairwise finished
  • with 3x90° vee groove for shaft Ø 8 - 75 mm
  • dimensions: L (length) x W (width) x H (height) = 125 x 44 x 69 mm
  • accuracy according to factory standard 0,02 mm
  • weight 0,7 kg
  • delivery always pairwise
135,00 EUR
plus 19% tax excl. Shipping costs
Magnetic stand with central clamping, total height 400 mm, 80 kg
NEW
Order-No. 906.380
  • Universal magnetic measuring stand
  • with central mechanical clamping by chuck head
  • fine adjustment
  • for dials 8 mm shank
  • with on/off switch and prismatic base
  • magnetic base L x B x H = 61 x 50 x 55 mm with thread M8
  • magnet force 80 kg
  • total height 400 mm
33,90 EUR
plus 19% tax excl. Shipping costs
Magnetic stand with central clamping, total height 430 mm, 80 kg
NEW
Order-No. 906.430
  • Universal magnetic measuring stand
  • with central mechanical clamping by chuck head
  • fine adjustment
  • for dials 8 mm shank
  • with on/off switch and prismatic base
  • magnetic base L x B x H = 61 x 50 x 55 mm with thread M8
  • magnet force 80 kg
  • total height 430 mm
63,00 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 1 - 6 mm (Taper Gauge) round conical
NEW
Order-No. 627.206
  • round conical hole gauge (bore measuring gauge)
  • cone of the bore gauge made of steel and glare-free chromed
  • knurled aluminum handle, anodized
  • round, hardened, chromed
  • taper 1:10
  • reading 0,1 mm
  • measuring range 1 - 6 mm
  • weight approx. 0,036 kg
Taper Gauge (Bore Gauge) for quick measuring of cylindrical bores !!
36,00 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 3 - 15 mm (Taper Gauge) round conical
NEW
Order-No. 627.215
  • round conical hole gauge (bore measuring gauge)
  • cone of the bore gauge made of steel and glare-free chromed
  • knurled aluminum handle, anodized
  • round, hardened, chromed
  • taper 1:10
  • reading 0,1 mm
  • measuring range 3 - 15 mm
  • weight approx. 0,130 kg
Taper Gauge (Bore Gauge) for quick measuring of cylindrical bores !!
42,00 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 15 - 30 mm (Taper Gauge) round conical
NEW
Order-No. 627.230
  • round conical hole gauge (bore measuring gauge)
  • cone of the bore gauge made of steel and glare-free chromed
  • knurled aluminum handle, anodized
  • round, hardened, chromed
  • taper 1:10
  • reading 0,1 mm
  • measuring range 15 - 30 mm
  • weight approx. 0,635 kg
Taper Gauge (Bore Gauge) for quick measuring of cylindrical bores !!
55,00 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 30 - 45 mm (Taper Gauge) round conical
NEW
Order-No. 627.245
  • round conical hole gauge (bore measuring gauge)
  • cone of the bore gauge made of steel and glare-free chromed
  • knurled aluminum handle, anodized
  • round, hardened, chromed
  • taper 1:10
  • reading 0,1 mm
  • measuring range 30 - 45 mm
  • weight approx. 1,560 kg
Taper Gauge (Bore Gauge) for quick measuring of cylindrical bores !!
129,00 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 45 - 60 mm (Taper Gauge) round conical
NEW
Order-No. 627.260
  • round conical hole gauge (bore measuring gauge)
  • cone of the bore gauge made of steel and glare-free chromed
  • knurled aluminum handle, anodized
  • round, hardened, chromed
  • taper 1:10
  • reading 0,1 mm
  • measuring range 45 - 60 mm
Taper Gauge (Bore Gauge) for quick measuring of cylindrical bores !!
435,00 EUR
plus 19% tax excl. Shipping costs
Telescopic gauge set 8-150 mm measuring range
Order-No. 686.006
  • made of steel
  • satin chrome finished
  • with knurled fix screw
  • Self-centering
  • 6-part telescopic gauge set for internal measurements
  • measuring range 8 - 150 mm
    8 - 12,7 / 12,7 - 19 / 19 - 32 / 32 - 54 / 54 - 90 / 90 - 150 mm
  • length up to 19 - 32 mm = 100 mm / from 32 - 54 mm = 125 mm
  • in plastic bag
To measure, insert the telescopic gauge into the hole, it will then center itself.
Fix the screw and then remove the telescopic gauge out of the material to be measured.
Then can you measure the result with a vernier caliper or micrometer !!
24,50 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 1 - 15 mm (Taper Slot Gauge) flat pattern
NEW
Order-No. 628.215
  • flat taper slot gauge
  • made of steel
  • reading 0,1 mm
  • measuring range 1 - 15 mm
  • weight approx. 0,035 kg
11,90 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 15 - 30 mm (Taper Slot Gauge) flat pattern
NEW
Order-No. 628.230
  • flat taper slot gauge
  • made of steel
  • reading 0,1 mm
  • measuring range 15 - 30 mm
  • weight approx. 0,040 kg
14,50 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 30 - 45 mm (Taper Slot Gauge) flat pattern
NEW
Order-No. 628.245
  • flat taper slot gauge
  • made of steel
  • reading 0,1 mm
  • measuring range 30 - 45 mm
  • weight approx. 0,045 kg
34,50 EUR
plus 19% tax excl. Shipping costs
Bore Gauge 45 - 60 mm (Taper Slot Gauge) flat pattern
NEW
Order-No. 628.260
  • flat taper slot gauge
  • made of steel
  • reading 0,1 mm
  • measuring range 45 - 60 mm
  • weight approx. 0,050 kg
45,50 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 0,20-0,50 mm ±0,002 mm 31 pieces
NEW
Order-No. 997.070 WORKSHOP-VERSION !!
  • 31-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 0,20 - 0,50 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

115,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 0,50-1,00 mm ±0,002 mm 51 pieces
NEW
Order-No. 997.071 WORKSHOP-VERSION !!
  • 51-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 0,50 - 1,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

169,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 1,01-2,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.072 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 1,01 - 2,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 2,01-3,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.073 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 2,01 - 3,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 3,01-4,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.074 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 3,01 - 4,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 4,01-5,00 mm ±0,002 mm 100 pieces
NEW
SOLD OUT
Order-No. 997.075 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 4,01 - 5,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 5,01-6,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.076 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 5,01 - 6,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 6,01-7,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.077 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 6,01 - 7,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 7,01-8,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.078 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 7,01 - 8,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 8,01-9,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.079 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 8,01 - 9,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Pin gauge set 9,01-10,00 mm ±0,002 mm 100 pieces
NEW
Order-No. 997.080 WORKSHOP-VERSION !!
  • 100-piece measuring pin set / pin gauge set
  • made of special steel
  • measuring range / diameter range of the measuring pins 9,01 - 10,00 mm in 0,01 mm steps
  • length of the pins 50 mm
  • accuracy according to factory standard ± 0,002 mm
  • in case / box

This Measuring Pin Set has a very good price-performance ratio and
is used for quick checking in the workshop ! TOP-VERSION on request by e-mail !!

285,00 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 150 mm on a ring, 8 blades 0,05-0,50 mm
NEW
Order-No. 607.150.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 8 Blades on a ring hanging
  • length 150 mm
  • width 12,7 mm
  • measuring range 0,05 - 0,50 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
3,20 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 200 mm on a ring, 8 blades 0,05-0,50 mm
NEW
Order-No. 607.200.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 8 Blades on a ring hanging
  • length 200 mm
  • width 12,7 mm
  • measuring range 0,05 - 0,50 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
4,20 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 300 mm on a ring, 8 blades 0,05-0,50 mm
NEW
Order-No. 607.300.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 8 Blades on a ring hanging
  • length 300 mm
  • width 12,7 mm
  • measuring range 0,05 - 0,50 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
5,00 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 500 mm on a ring, 8 blades 0,05-0,50 mm
NEW
TOP
Order-No. 607.500.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 8 Blades on a ring hanging
  • length 500 mm
  • width 12,7 mm
  • measuring range 0,05 - 0,50 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
9,90 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 1000 mm on a ring, 8 blades 0,05-0,50 mm
NEW
TOP
Order-No. 607.110.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 8 Blades on a ring hanging
  • length 1000 mm
  • width 12,7 mm
  • measuring range 0,05 - 0,50 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
19,95 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 150 mm on a ring, 13 blades 0,05-1,00 mm
NEW
Order-No. 608.150.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 13 Blades on a ring hanging
  • length 150 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 /
    0,60 / 0,70 / 0,80 / 0,90 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
5,00 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 200 mm on a ring, 13 blades 0,05-1,00 mm
NEW
Order-No. 608.200.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 13 Blades on a ring hanging
  • length 200 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 /
    0,60 / 0,70 / 0,80 / 0,90 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
6,30 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 300 mm on a ring, 13 blades 0,05-1,00 mm
NEW
Order-No. 608.300.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 13 Blades on a ring hanging
  • length 300 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 /
    0,60 / 0,70 / 0,80 / 0,90 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
8,20 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 500 mm on a ring, 13 blades 0,05-1,00 mm
NEW
TOP
Order-No. 608.500.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 13 Blades on a ring hanging
  • length 500 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 /
    0,60 / 0,70 / 0,80 / 0,90 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
15,40 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 1000 mm on a ring, 13 blades 0,05-1,00 mm
NEW
TOP
Order-No. 608.110.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 13 Blades on a ring hanging
  • length 1000 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,40 / 0,50 /
    0,60 / 0,70 / 0,80 / 0,90 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc. 
32,00 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 150 mm on a ring, 20 blades 0,05-1,00 mm
NEW
Order-No. 609.150.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 20 Blades on a ring hanging
  • length 150 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
    0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc.  
7,60 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 200 mm on a ring, 20 blades 0,05-1,00 mm
NEW
Order-No. 609.200.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 20 Blades on a ring hanging
  • length 200 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
    0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc.  
9,80 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 300 mm on a ring, 20 blades 0,05-1,00 mm
NEW
Order-No. 609.300.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 20 Blades on a ring hanging
  • length 300 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
    0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc.  
11,90 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 500 mm on a ring, 20 blades 0,05-1,00 mm
NEW
TOP
Order-No. 609.500.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 20 Blades on a ring hanging
  • length 500 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
    0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc.  
22,30 EUR
plus 19% tax excl. Shipping costs
Feeler Gauge Set 1000 mm on a ring, 20 blades 0,05-1,00 mm
NEW
TOP
Order-No. 609.110.C
  • from hardened spring band steel
  • cylindrical shaped blades
  • 20 Blades on a ring hanging
  • length 1000 mm
  • width 12,7 mm
  • measuring range 0,05 - 1,00 mm
    Set combination:
    0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
    0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
  • manufacture standard 12 µm
For checking gaps, contact distances, adjust valve clearance, etc.  
45,50 EUR
plus 19% tax excl. Shipping costs
Granite measuring table 150 x 100 mm range 100 mm
NEW
Order-No. 914.010
  • with granite measuring table, antimagnetic
  • granite table degree 0
  • with rigid measuring arm / cross arm (throat) 100 mm
  • column 30 x 150 mm
  • for dial indicator with shaft 8 mm Ø
  • table size L x B x H = 150 x 100 x 50 mm
  • measuring range / measuring height 100 mm
98,00 EUR
plus 19% tax excl. Shipping costs
Granite measuring table 200 x 150 mm range 150 mm
NEW
Order-No. 914.015
  • with granite measuring table, antimagnetic
  • granite table degree 0
  • with rigid measuring arm / cross arm (throat) 100 mm
  • column 30 x 200 mm
  • for dial indicator with shaft 8 mm Ø
  • table size L x B x H = 200 x 150 x 50 mm
  • measuring range / measuring height 150 mm
189,00 EUR
plus 19% tax excl. Shipping costs
Granite measuring table 300 x 200 mm range 200 mm
NEW
Order-No. 914.020
  • with granite measuring table, antimagnetic
  • granite table degree 0
  • with rigid measuring arm / cross arm (throat) 100 mm
  • column 30 x 245 mm
  • for dial indicator with shaft 8 mm Ø
  • table size L x B x H = 300 x 200 x 45 mm
  • measuring range / measuring height 200 mm
229,00 EUR
plus 19% tax excl. Shipping costs
Granite measuring table 300 x 200 mm range 250 mm
NEW
Order-No. 914.032
  • with granite measuring table, antimagnetic
  • granite table degree 0
  • with rigid measuring arm / cross arm (throat) 120 mm
  • column 35 mm with thread
  • for dial indicator with shaft 8 mm Ø
  • table size L x B x H = 300 x 200 x 50 mm
  • measuring range / measuring height 250 mm
275,00 EUR
plus 19% tax excl. Shipping costs
Measuring ball set steel 50 piece ball-size 1-25 mm
NEW
Order-No. 993.500
  • made of hardened steel HRC 60 ± 2
  • 50-piece gauge ball set
  • measuring ball diameter 1 - 25 mm step 1 mm
  • 1 pair of measuring balls (two balls of each size)
    Ø 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 /
    15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 mm
  • accuracy to factory standard 3µ = 0,003 mm
  • in ABS case
125,00 EUR
plus 19% tax excl. Shipping costs
1 to 62 (from a total of 62)