Main page » Measuring Tools / Instruments » 5. Micrometer / Special Micrometer » Digital Three-Point Inside Micrometer

Digital Three-Point Inside Micrometer

Digital three point internal micrometer, measuring range 6-8 mm

Order-No. 293.008

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
range 6 - 8 mm
distance to ground (C) 1 mm
dimension (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 8 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

289,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 6-8 mm for blind hole

290.008

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

315,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 8-10 mm

Order-No. 293.010

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
range 8 - 10 mm
distance to ground (C) 1 mm
dimension (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 8 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

298,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 8-10 mm for blind hole

290.010

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

315,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 10-12 mm

Order-No. 293.012

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
range 10 - 12 mm
distance to ground (C) 1 mm
dimension (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 10 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

298,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 10-12 mm for blind hole

290.012

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

315,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 12-16 mm

Order-No. 293.016

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 12 - 16 mm
distance to ground (C) 0,4 mm
dimension (L) 45 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 12 mm
with extension, length 100 Ø 11,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

262,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 12-16 mm for blind hole

290.016

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

310,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 16-20 mm

Order-No. 293.020

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 16 - 20 mm
distance to ground (C) 0,4 mm
dimension (L) 45 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 16 mm
with extension, length 100 Ø 11,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

270,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 16-20 mm for blind hole

290.020

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

310,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 20-25 mm

Order-No. 293.025

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 20 - 25 mm
distance to ground (C) 0,4 mm
dimension (L) 53 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 20 mm
with extension, length 150 Ø 16,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

305,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 20-25 mm for blind hole

290.025

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

339,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 25-30 mm

Order-No. 293.030

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 25 - 30 mm
distance to ground (C) 0,4 mm
dimension (L) 53 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 25 mm
with extension, length 150 Ø 16,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

305,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 25-30 mm for blind hole

290.030

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

339,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 30-40 mm

Order-No. 293.040

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 30 - 40 mm
distance to ground (C) 0,4 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 30 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

325,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 30-40 mm for blind hole

290.040

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

375,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 40-50 mm

Order-No. 293.050

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 40 - 50 mm
distance to ground (C) 0,4 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 40 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

335,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 40-50 mm for blind hole

290.050

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

375,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 50-63 mm

Order-No. 293.063

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 50 - 63 mm
distance to ground (C) 0,5 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 50 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

365,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 50-63 mm for blind hole

290.063

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

405,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 62-75 mm

Order-No. 293.075

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 62 - 75 mm
distance to ground (C) 0,5 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 62 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

378,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 62-75 mm for blind hole

290.075

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

435,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 75-88 mm

Order-No. 293.088

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 75 - 88 mm
distance to ground (C) 0,5 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 87 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

399,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 75-88 mm for blind hole

290.088

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

450,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, measuring range 87-100 mm

Order-No. 293.100

Digital three-point measuring micrometer centering self and aligning self
Digital three-point inside micrometer for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
range 87 - 100 mm
distance to ground (C) 0,5 mm
dimension (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 87 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

429,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer 87-100 mm for blind hole

290.100

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

475,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 6-10 mm

Order-No. 293.710

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
complete measuring range 6 - 10 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 6 - 8 mm, dimension (C) 1 mm, (L) 40 mm
measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 8 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

480,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 8-12 mm

Order-No. 293.712

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
complete measuring range 8 - 12 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
measuring range 10 - 12 mm, dimension (C) 1 mm, (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 10 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

480,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 12-20 mm

Order-No. 293.720

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 12 - 20 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 12 - 16 mm, dimension (C) 0,4 mm, (L) 45 mm
measuring range 16 - 20 mm, dimension (C) 0,4 mm, (L) 45 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 16 mm
with extension, length 100 Ø 11,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

510,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 20-30 mm

Order-No. 293.730

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 20 - 30 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 20 - 25 mm, dimension (C) 0,4 mm, (L) 53 mm
measuring range 25 - 30 mm, dimension (C) 0,4 mm, (L) 53 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 25 mm
with extension, length 150 Ø 16,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

525,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 30-50 mm

Order-No. 293.750

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 30 - 50 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 30 - 40 mm, dimension (C) 0,4 mm, (L) 67 mm
measuring range 40 - 50 mm, dimension (C) 0,4 mm, (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 40 mm
with extension, length 150 Ø 16,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

575,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 50-75 mm

Order-No. 293.775

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 50 - 75 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 50 - 63 mm, dimension (C) 0,5 mm, (L) 67 mm
measuring range 62 - 75 mm, dimension (C) 0,5 mm, (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 62 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

610,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer 75-100 mm

Order-No. 293.800

Digital three-point measuring micrometer centering self and aligning self
digital three-point inside micrometer set with exchangeable measuring heads
for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 75 - 100 mm with one digital head and two measuring heads
for a digital three-point internal micrometer
measuring range 75 - 88 mm, dimension (C) 0,5 mm, (L) 67 mm
measuring range 87 - 100 mm, dimension (C) 0,5 mm, (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 87 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

675,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer set, complete measuring range 6-12 mm

Order-No. 293.512

Digital three-point measuring micrometer centering self and aligning self
3-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
reading 0,001 mm
complete measuring range 6 - 12 mm with three single digital three-point internal micrometer
measuring range 6 - 8 mm, dimension (C) 1 mm, (L) 40 mm
measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
measuring range 10 - 12 mm, dimension (C) 1 mm, (L) 40 mm
accuracy 0,004 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 8 mm, Ø 10 mm
with extension, length 50 Ø 5,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

865,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer set 6-12 mm for blind hole

290.512

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

870,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer set, complete measuring range 12-20 mm

Order-No. 293.520

Digital three-point measuring micrometer centering self and aligning self
2-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 12 - 20 mm with two single digital three-point internal micrometer
measuring range 12 - 16 mm, dimension (C) 0,4 mm, (L) 45 mm
measuring range 16 - 20 mm, dimension (C) 0,4 mm, (L) 45 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 16 mm
with extension, length 100 Ø 11,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

505,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer set 12-20 mm for blind hole

290.520

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

570,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer set, complete measuring range 20-50 mm

Order-No. 293.550

Digital three-point measuring micrometer centering self and aligning self
4-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 20 - 50 mm with four single digital three-point internal micrometer
measuring range 20 - 25 mm, dimension (C) 0,4 mm, (L) 53 mm
measuring range 25 - 30 mm, dimension (C) 0,4 mm, (L) 53 mm
measuring range 30 - 40 mm, dimension (C) 0,4 mm, (L) 67 mm
measuring range 40 - 50 mm, dimension (C) 0,4 mm, (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 25 mm, Ø 40 mm
with extension, length 150 Ø 16,7 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

1.075,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer set 20-50 mm for blind hole

290.550

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

1.135,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer set, complete measuring range 50-100 mm

Order-No. 293.600

Digital three-point measuring micrometer centering self and aligning self
4-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
drum and sleeve satin chrome finished
with carbide measuring faces
reading 0,001 mm
complete measuring range 50 - 100 mm with four single digital three-point internal micrometer
measuring range 50 - 63 mm, dimension (C) 0,5 mm, (L) 67 mm
measuring range 62 - 75 mm, dimension (C) 0,5 mm, (L) 67 mm
measuring range 75 - 88 mm, dimension (C) 0,5 mm, (L) 67 mm
measuring range 87 - 100 mm, dimension (C) 0,5 mm, (L) 67 mm
accuracy 0,005 mm ( at full contact of the measuring faces !! )
ON / OFF button
Zeroing in any position
switchable mm/inch
ABS button (Absolute measurement / Relative measurement)
Hold function (measured data can be kept)
Preset function (setting a numerical value)
with button cell LR44 1,5V
with data output (RB 4)
with setting ring gauge Ø 62 mm, Ø 87 mm
with extension, length 150 Ø 21,8 mm for measuring deep bores
with setting
Ident number
operation instructions
in case / box

Remaining stock !! Only valid while stocks last !!

1.325,00 EUR

plus 19% tax excl. Shipping costs

Digital 3 point inside micrometer set 50-100 mm for blind hole

290.600

for blind hole
with carbide measuring faces
satin chrome finished
with setting gauge and extension
in case

1.340,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 100 - 125 mm

293.125

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

575,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 100 - 125 mm, blind hole

293.126

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

645,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 125 - 150 mm

293.150

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

575,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 125 - 150 mm, blind hole

293.151

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

645,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 150 - 175 mm

293.175

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

Price on request

Digital three point internal micrometer, 150 - 175 mm, blind hole

293.176

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

709,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 175 - 200 mm

293.200

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

609,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 175 - 200 mm, blind hole

293.201

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

709,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 200 - 225 mm

293.225

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

809,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 200 - 225 mm, blind hole

293.226

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

885,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 225 - 250 mm

293.250

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

809,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 225 - 250 mm, blind hole

293.251

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

885,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 250 - 275 mm

293.275

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

969,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 250 - 275 mm, blind hole

293.276

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

1.055,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 275 - 300 mm

293.300

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

969,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 275 - 300 mm, blind hole

293.301

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

1.055,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 300 - 325 mm

293.325

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

Price on request

Digital three point internal micrometer, 300 - 325 mm, blind hole

293.326

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

1.419,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 325 - 350 mm

293.350

for be used for pass hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 18 mm / size (b) = 18 mm
in case
delivery without setting ring gauge

1.195,00 EUR

plus 19% tax excl. Shipping costs

Digital three point internal micrometer, 325 - 350 mm, blind hole

293.351

for be used for blind hole
with carbide measuring faces
scale and nonius satin chrome finished
reading 0,001 mm
distance to ground (c) 0,5 mm / size (b) = 19,7 mm
in case
delivery without setting ring gauge

1.419,00 EUR

plus 19% tax excl. Shipping costs

Pistol-three-point inside measuring instrument, 6 - 12 mm

Order-No. 292.112

Digital three-point internal measuring instrument
Digital three-point inside micrometer with pistol grip and digital dial indicator in set 6-12 mm
for suitable blind hole bore (dimension A)
Total measuring range 6 - 12 mm with a pistol grip (with digital dial indicator) and three interchangeable
measuring range head 6-8 mm, dimension (A) 1,5 mm and (L) 50 mm
measuring range head 8-10 mm, dimension (A) 1,5 mm and (L) 50 mm
measuring range head 10-12 mm, dimension (A) 1,5 mm and (L) 50 mm
accuracy 0,009 mm ( at full contact of the measuring faces !! )
with digital dial indicator
measuring range 12,7 mm
display rotatable
reading 0,001 mm or 0,00005"
measuring direction reversible
clamp shank 8 h6
with setting ring Ø 8 mm and Ø 10 mm
with extension, length 100 mm for measuring deeper bores
operation instructions
Delivery:
- Pistol grip
- with the measuring heads above
- with setting ring gauge and extension
- with digital dial indicator
in case / box

For fast and efficient measurement of through holes and blind holes.
Usable for right-handed and left-handed !!

Price on request

Pistol-three-point inside measuring instrument, 12 - 20 mm

Order-No. 292.120

Digital three-point internal measuring instrument
Digital three-point inside micrometer with pistol grip and digital dial indicator in set 12-20 mm
for suitable blind hole bore (dimension A)
measuring faces carbide tipped
Total measuring range 12 - 20 mm with a pistol grip (with digital dial indicator) and two interchangeable measuring range head 12-16 mm, dimension (A) 0,5 mm and (L) 65 mm
measuring range head 16-20 mm, dimension (A) 0,5 mm and (L) 65 mm
accuracy 0,009 mm ( at full contact of the measuring faces !! )
with digital dial indicator
measuring range 12,7 mm
display rotatable
reading 0,001 mm or 0,00005"
measuring direction reversible
clamp shank 8 h6
with setting ring Ø 16 mm
with extension, length 150 mm for measuring deeper bores
operation instructions
Delivery:
- Pistol grip
- with the measuring heads above
- with setting ring gauge and extension
- with digital dial indicator
in case / box

For fast and efficient measurement of through holes and blind holes.
Usable for right-handed and left-handed !!

Price on request

Pistol-three-point inside measuring instrument, 20 - 30 mm

Order-No. 292.130

Digital three-point internal measuring instrument
Digital three-point inside micrometer with pistol grip and digital dial indicator in set 20-30 mm
for suitable blind hole bore (dimension A)
measuring faces carbide tipped
Total measuring range 20 - 30 mm with a pistol grip (without digital dial indicator) and two interchangeable measuring range head 20-25 mm, dimension (A) 0,5 mm and (L) 91 mm
measuring range head 25-30 mm, dimension (A) 0,5 mm and (L) 91 mm
accuracy 0,009 mm ( at full contact of the measuring faces !! )
with digital dial indicator
measuring range 12,7 mm
display rotatable
reading 0,001 mm or 0,00005"
measuring direction reversible
clamp shank 8 h6
with setting ring Ø 25 mm
with extension, length 150 mm for measuring deeper bores
operation instructions
Delivery:
- Pistol grip
- with the measuring heads above
- with setting ring gauge and extension
- without digital dial indicator
in case / box

For fast and efficient measurement of through holes and blind holes.
Usable for right-handed and left-handed !!

Price on request

Pistol-three-point inside measuring instrument, 30 - 50 mm

Order-No. 292.150

Digital three-point internal measuring instrument
Digital three-point inside micrometer with pistol grip and digital dial indicator in set 30-50 mm
for suitable blind hole bore (dimension A)
measuring faces carbide tipped
Total measuring range 30 - 50 mm with a pistol grip (without digital dial indicator) and two interchangeable measuring range head 30-40 mm, dimension (A) 0,5 mm and (L) 97 mm
measuring range head 40-50 mm, dimension (A) 0,5 mm and (L) 97 mm
accuracy 0,009 mm ( at full contact of the measuring faces !! )
with digital dial indicator
measuring range 12,7 mm
display rotatable
reading 0,001 mm or 0,00005"
measuring direction reversible
clamp shank 8 h6
with setting ring Ø 40 mm
with extension, length 150 mm for measuring deeper bores
operation instructions
Delivery:
- Pistol grip
- with the measuring heads above
- with setting ring gauge and extension
- without digital dial indicator
in case / box

For fast and efficient measurement of through holes and blind holes.
Usable for right-handed and left-handed !!

Price on request

Pistol-three-point inside measuring instrument, 50 - 100 mm

Order-No. 292.200

Digital three-point internal measuring instrument
Digital three-point inside micrometer with pistol grip and digital dial indicator in set 50-100 mm
for suitable blind hole bore (dimension A)
measuring faces carbide tipped
Total measuring range 50 - 100 mm with a pistol grip (without digital dial indicator) and four interchangeable measuring range head 50-63 mm, dimension (A) 0,5 mm and (L) 112 mm
measuring range head 63-75 mm, dimension (A) 0,5 mm and (L) 112 mm
measuring range head 75-88 mm, dimension (A) 0,5 mm and (L) 112 mm
measuring range head 87-100 mm, dimension (A) 0,5 mm and (L) 112 mm
accuracy 0,009 mm ( at full contact of the measuring faces !! )
with digital dial indicator
measuring range 12,7 mm
display rotatable
reading 0,001 mm or 0,00005"
measuring direction reversible
clamp shank 8 h6
with setting ring gauge Ø 62 mm and Ø 87 mm
with extension, length 150 mm for measuring deeper bores
operation instructions
Delivery:
- Pistol grip
- with the measuring heads above
- with setting ring gauge and extension
- without digital dial indicator
in case / box

For fast and efficient measurement of through holes and blind holes.
Usable for right-handed and left-handed !!

Price on request

1 to 66 (from a total of 66)