Digital Three-Point Inside Micrometer

Digital three point internal micrometer, measuring range 6-8 mm
Order-No. 293.008
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • range 6 - 8 mm
  • distance to ground (C) 1 mm
  • dimension (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 8 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
289,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 6-8 mm for blind hole
290.008
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
315,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 8-10 mm
Order-No. 293.010
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • range 8 - 10 mm
  • distance to ground (C) 1 mm
  • dimension (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 8 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
289,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 8-10 mm for blind hole
SOLD OUT
290.010
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
315,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 10-12 mm
Order-No. 293.012
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • range 10 - 12 mm
  • distance to ground (C) 1 mm
  • dimension (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 10 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
289,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 10-12 mm for blind hole
290.012
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
315,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 12-16 mm
Order-No. 293.016
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 12 - 16 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 45 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 12 mm
  • with extension, length 100 Ø 11,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
262,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 12-16 mm for blind hole
290.016
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
310,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 16-20 mm
Order-No. 293.020
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 16 - 20 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 45 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 16 mm
  • with extension, length 100 Ø 11,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
262,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 16-20 mm for blind hole
290.020
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
310,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 20-25 mm
Order-No. 293.025
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 20 - 25 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 53 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 20 mm
  • with extension, length 150 Ø 16,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
295,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 20-25 mm for blind hole
290.025
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
339,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 25-30 mm
Order-No. 293.030
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 25 - 30 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 53 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 25 mm
  • with extension, length 150 Ø 16,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
295,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 25-30 mm for blind hole
290.030
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
339,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 30-40 mm
Order-No. 293.040
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 30 - 40 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 30 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
325,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 30-40 mm for blind hole
290.040
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
375,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 40-50 mm
SOLD OUT
Order-No. 293.050
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 40 - 50 mm
  • distance to ground (C) 0,4 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 40 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
335,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 40-50 mm for blind hole
290.050
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
375,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 50-63 mm
Order-No. 293.063
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 50 - 63 mm
  • distance to ground (C) 0,5 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 50 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
350,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 50-63 mm for blind hole
290.063
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
405,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 62-75 mm
Order-No. 293.075
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 62 - 75 mm
  • distance to ground (C) 0,5 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 62 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
365,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 62-75 mm for blind hole
290.075
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
435,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 75-88 mm
Order-No. 293.088
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 75 - 88 mm
  • distance to ground (C) 0,5 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 87 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
385,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 75-88 mm for blind hole
290.088
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
450,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, measuring range 87-100 mm
Order-No. 293.100
  • Digital three-point measuring micrometer centering self and aligning self
  • Digital three-point inside micrometer for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • range 87 - 100 mm
  • distance to ground (C) 0,5 mm
  • dimension (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 87 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
415,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer 87-100 mm for blind hole
290.100
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
475,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer 6-10 mm
Order-No. 293.710
  • Digital three-point measuring micrometer centering self and aligning self
  • digital three-point inside micrometer set with exchangeable measuring heads
    for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • complete measuring range 6 - 10 mm with one digital head and two measuring heads
    for a digital three-point internal micrometer

    measuring range 6 - 8 mm, dimension (C) 1 mm, (L) 40 mm
    measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 8 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
480,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer 8-12 mm
Order-No. 293.712
  • Digital three-point measuring micrometer centering self and aligning self
  • digital three-point inside micrometer set with exchangeable measuring heads
    for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • complete measuring range 8 - 12 mm with one digital head and two measuring heads
    for a digital three-point internal micrometer

    measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
    measuring range 10 - 12 mm, dimension (C) 1 mm, (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 10 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
480,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer 12-20 mm
Order-No. 293.720
  • Digital three-point measuring micrometer centering self and aligning self
  • digital three-point inside micrometer set with exchangeable measuring heads
    for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 12 - 20 mm with one digital head and two measuring heads
    for a digital three-point internal micrometer

    measuring range 12 - 16 mm, dimension (C) 0,4 mm, (L) 45 mm
    measuring range 16 - 20 mm, dimension (C) 0,4 mm, (L) 45 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 16 mm
  • with extension, length 100 Ø 11,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
510,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer 20-30 mm
Order-No. 293.730
  • Digital three-point measuring micrometer centering self and aligning self
  • digital three-point inside micrometer set with exchangeable measuring heads
    for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 20 - 30 mm with one digital head and two measuring heads
    for a digital three-point internal micrometer

    measuring range 20 - 25 mm, dimension (C) 0,4 mm, (L) 53 mm
    measuring range 25 - 30 mm, dimension (C) 0,4 mm, (L) 53 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 25 mm
  • with extension, length 150 Ø 16,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
525,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer 30-50 mm
Order-No. 293.750
  • Digital three-point measuring micrometer centering self and aligning self
  • digital three-point inside micrometer set with exchangeable measuring heads
    for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 30 - 50 mm with one digital head and two measuring heads
    for a digital three-point internal micrometer

    measuring range 30 - 40 mm, dimension (C) 0,4 mm, (L) 67 mm
    measuring range 40 - 50 mm, dimension (C) 0,4 mm, (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 40 mm
  • with extension, length 150 Ø 16,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
575,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer set, complete measuring range 6-12 mm
Order-No. 293.512
  • Digital three-point measuring micrometer centering self and aligning self
  • 3-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • reading 0,001 mm
  • complete measuring range 6 - 12 mm with three single digital three-point internal micrometer
    measuring range 6 - 8 mm, dimension (C) 1 mm, (L) 40 mm
    measuring range 8 - 10 mm, dimension (C) 1 mm, (L) 40 mm
    measuring range 10 - 12 mm, dimension (C) 1 mm, (L) 40 mm
  • accuracy 0,004 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 8 mm, Ø 10 mm
  • with extension, length 50 Ø 5,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
810,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer set 6-12 mm for blind hole
290.512
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
870,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer set, complete measuring range 12-20 mm
Order-No. 293.520
  • Digital three-point measuring micrometer centering self and aligning self
  • 2-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 12 - 20 mm with two single digital three-point internal micrometer
    measuring range 12 - 16 mm, dimension (C) 0,4 mm, (L) 45 mm
    measuring range 16 - 20 mm, dimension (C) 0,4 mm, (L) 45 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 16 mm
  • with extension, length 100 Ø 11,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
475,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer set 12-20 mm for blind hole
290.520
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
570,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer set, complete measuring range 20-50 mm
Order-No. 293.550
  • Digital three-point measuring micrometer centering self and aligning self
  • 4-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 20 - 50 mm with four single digital three-point internal micrometer
    measuring range 20 - 25 mm, dimension (C) 0,4 mm, (L) 53 mm
    measuring range 25 - 30 mm, dimension (C) 0,4 mm, (L) 53 mm
    measuring range 30 - 40 mm, dimension (C) 0,4 mm, (L) 67 mm
    measuring range 40 - 50 mm, dimension (C) 0,4 mm, (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 25 mm, Ø 40 mm
  • with extension, length 150 Ø 16,7 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
1.020,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer set 20-50 mm for blind hole
SOLD OUT
290.550
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
1.135,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer set, complete measuring range 50-100 mm
Order-No. 293.600
  • Digital three-point measuring micrometer centering self and aligning self
  • 4-pieces digital three-point inside micrometer set for blind hole bore suitable (dimension C)
  • drum and sleeve satin chrome finished
  • with carbide measuring faces
  • reading 0,001 mm
  • complete measuring range 50 - 100 mm with four single digital three-point internal micrometer
    measuring range 50 - 63 mm, dimension (C) 0,5 mm, (L) 67 mm
    measuring range 62 - 75 mm, dimension (C) 0,5 mm, (L) 67 mm
    measuring range 75 - 88 mm, dimension (C) 0,5 mm, (L) 67 mm
    measuring range 87 - 100 mm, dimension (C) 0,5 mm, (L) 67 mm
  • accuracy 0,005 mm ( at full contact of the measuring faces !! )
  • ON / OFF button
  • Zeroing in any position
  • switchable mm/inch
  • ABS button (Absolute measurement / Relative measurement)
  • Hold function (measured data can be kept)
  • Preset function (setting a numerical value)
  • with button cell LR44 1,5V
  • with data output (RB 4)
  • with setting ring gauge Ø 62 mm, Ø 87 mm
  • with extension, length 150 Ø 21,8 mm for measuring deep bores
  • with setting
  • Ident number
  • operation instructions
  • in case / box
1.255,00 EUR
plus 16% tax excl. Shipping costs
Digital 3 point inside micrometer set 50-100 mm for blind hole
290.600
  • for blind hole
  • with carbide measuring faces
  • satin chrome finished
  • with setting gauge and extension
  • in case
1.340,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 100 - 125 mm
293.125
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
545,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 100 - 125 mm, blind hole
293.126
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
610,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 125 - 150 mm
293.150
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
545,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 125 - 150 mm, blind hole
293.151
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge
610,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 150 - 175 mm
293.175
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
580,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 150 - 175 mm, blind hole
293.176
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge
675,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 175 - 200 mm
293.200
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
585,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 175 - 200 mm, blind hole
293.201
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge
680,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 200 - 225 mm
293.225
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
775,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 200 - 225 mm, blind hole
293.226
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
845,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 225 - 250 mm
293.250
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
775,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 225 - 250 mm, blind hole
293.251
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
845,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 250 - 275 mm
293.275
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
925,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 250 - 275 mm, blind hole
293.276
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
985,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 275 - 300 mm
293.300
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
955,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 275 - 300 mm, blind hole
293.301
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
990,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 300 - 325 mm
293.325
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
1.115,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 300 - 325 mm, blind hole
293.326
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
1.325,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 325 - 350 mm
293.350
  • for be used for pass hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 18 mm / size (b) = 18 mm
  • in case
  • delivery without setting ring gauge
1.230,00 EUR
plus 16% tax excl. Shipping costs
Digital three point internal micrometer, 325 - 350 mm, blind hole
293.351
  • for be used for blind hole
  • with carbide measuring faces
  • scale and nonius satin chrome finished
  • reading 0,001 mm
  • distance to ground (c) 0,5 mm / size (b) = 19,7 mm
  • in case
  • delivery without setting ring gauge 
1.325,00 EUR
plus 16% tax excl. Shipping costs
1 to 66 (from a total of 66)