Main page » Calibration of measuring tools » Depth Caliper with calibration certificate

Depth Caliper with calibration certificate

Order-No. WK.224.210

made of stainless steel (Stainless Hardened)
with set crew
measuring range 200 mm
bridge length 100 mm
reading 0,01 mm or 0,0005", switchable
with large LCD display 12 mm
button ON/OFF, UNIT (switch mm or inch), ZERO (setting at any position), HOLD (measured value fixation)
with battery CR 2032 voltage 3V (measuring system 3V)
accuracy DIN 862 (0.03 mm)
with RS 232C data output (RB 5)
with operating instructions
in case or box
including a calibration certificate (English and German) from an international calibration laboratory !
(The calibration certificate may be dated up to 8 weeks earlier than the date of sale)

69,00 EUR

Order-No. WK.224.315

made of stainless steel (Stainless Hardened)
with set crew
measuring range 300 mm
bridge length 150 mm
reading 0,01 mm or 0,0005", switchable
with large LCD display 12 mm
button ON/OFF, UNIT (switch mm or inch), ZERO (setting at any position), HOLD (measured value fixation)
with battery CR 2032 voltage 3V (measuring system 3V)
accuracy DIN 862 (0.03 mm)
with RS 232C data output (RB 5)
with operating instructions
in case or box
including a calibration certificate (English and German) from an international calibration laboratory !
(The calibration certificate may be dated up to 8 weeks earlier than the date of sale)

125,00 EUR

Order-No. WK.224.267

inductive measuring system
made of stainless steel (Inox, Stainless hardened)
Protection class IP67 (waterproof and dustproof)
measuring range 200 mm
bridge length 100 mm
reading 0.01 mm or 0.0005” (switchable)
with 0/ON-OFF, mm-inch button
accuracy according to DIN 862 (0.03 mm)
with button cell CR 2032 voltage 3V
in case or box
including a calibration certificate (English and German) from an international calibration laboratory !
(The calibration certificate may be dated up to 8 weeks earlier than the date of sale)

139,00 EUR

Order-No. WK.224.367

inductive measuring system
made of stainless steel (Inox, Stainless hardened)
Protection class IP67 (waterproof and dustproof)
measuring range 300 mm
bridge length 150 mm
reading 0.01 mm or 0.0005” (switchable)
with 0/ON-OFF, mm-inch button
accuracy according to DIN 862 (0.03 mm)
with button cell CR 2032 voltage 3V
in case or box
including a calibration certificate (English and German) from an international calibration laboratory !
(The calibration certificate may be dated up to 8 weeks earlier than the date of sale)

189,00 EUR

1 to 4 (from a total of 4)