Dial Indicator with calibration certificate

Dial gauge with calibration certificate Measuring range 10x0.01 mm DIN 878 shock-protected Order-No. WK.742.011
NEW
Dial gauge with calibration certificate Measuring range 10x0.01 mm DIN 878 shock-protected
Order-No. WK.742.011
  • metal casing
  • with adjustable tolerance marks
  • yellow rotating dial (graduated scale) with knurled outer ring
  • with locking screw for fixing the outer ring
  • measuring mechanism jewel bearing with shock protection
  • measuring range (measuring span) 10 mm
  • reading (scale division) 0.01 mm
  • 1 pointer rotation = 1 mm
  • outer ring Ø 58 mm
  • dimension (A+B) 110 mm, (F) 20 mm, (G) 21 mm, (H) 52 mm
  • clamping shaft Ø 8 h6
  • standard measuring insert (measuring probe) with spherical measuring surface and thread M 2.5 - 6g
     (interchangeable with special measuring probes)
  • accuracy according to DIN 878
  • with ID number
  • in case or box
  • including a calibration certificate (English and German) from an international calibration laboratory !
    (The calibration certificate may be dated up to 8 weeks earlier than the date of sale)
39,00 EUR
plus 19% tax excl. Shipping costs
Digital dial indicator with calibration certificate Measuring range 12.7 mm Reading 0.01 mm Order-No. WK.246.031
NEW
Digital dial indicator with calibration certificate Measuring range 12.7 mm Reading 0.01 mm

Order-No. WK.246.031

Dial indicator with digital display and absolute measuring system

  • digital LCD display rotatable from 0 - 330
  • with large reading digits 7 mm
  • measuring range 12.7 mm
  • digital reading 0.01 mm
  • accuracy according to factory standard 10µ = 0.010 mm
  • repeat accuracy 5µ = 0.005 mm
  • measuring force ≥ 1.5 N
  • outer Ø 60 mm
  • dimension (L1) 56 mm, (L2) 126 mm
  • On/off button (ON/OFF)
  • ZERO / ABS button
  • PRESET button (measured value presetting)
  • + / - button (setting button)
  • TOL button (tolerance setting button)
  • measuring direction reversible
  • Zero setting possible at any position
  • MM-INCH toggle button
  • ORIGIN button
  • no measuring speed limitation
  • clamping shaft Ø 8 h6
  • with button cell CR 2032 voltage 3V (measuring system 3V)
  • with data output RS 232 (RB 6)
  • with operating instructions
  • in case or box
  • including a calibration certificate (English and German) from an international calibration laboratory !
    (The calibration certificate may be dated up to 8 weeks earlier than the date of sale)
The following measurement methods are possible:
1. preset measurement (measurement with initial value)
2. absolute measurement
3. relative measurement
4. tolerance measurement (measurements with tolerances)

Optionally available for this digital dial gauge:
Article no. 246.036 Wire lifter with locking screw, stroke approx. 20 mm
Article no. 246.037 Lifting lever (lifting device) !!
125,00 EUR
plus 19% tax excl. Shipping costs
1 to 2 (from a total of 2)