Main page » New products

New product

Digital micrometer 225-250 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.010

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 225-250 mm
frame painted
Clamp depth (C) 142 mm, dimension A=19 mm, dimension L=260 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 2.1 kg
in case / box

255,00 EUR

Digital micrometer 200-225 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.009

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 200-225 mm
frame painted
Clamp depth (C) 130 mm, dimension A=12 mm, dimension L=209.5 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 1.80 kg
in case / box

239,00 EUR

Digital micrometer 175-200 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.008

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 175-200 mm
frame painted
Clamp depth (C) 107 mm, dimension A=12 mm, dimension L=209.5 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 1.60 kg
in case / box

235,00 EUR

Digital micrometer 150-175 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.007

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 150-175 mm
frame painted
Clamp depth (C) 94.5 mm, dimension A=10 mm, dimension L=184 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 1.30 kg
in case / box

229,00 EUR

Digital micrometer 125-150 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.006

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 125-150 mm
frame painted
Clamp depth (C) 94.5 mm, dimension A=10 mm, dimension L=158 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 1.10 kg
in case / box

179,00 EUR

Digital micrometer 100-125 mm, 0.001 mm, IP 65, DIN 863

Order-No. 241.005

Spindle thread hardened and ground
chrome finished measuring sleeve and measuring drum Ø 18 mm
with carbide measuring surfaces
Measuring spindle Ø 6.5 mm
with large digital LCD
with large reading digits 7 mm
digital reading 0.001 mm or 0.00005"
Accuracy according to DIN 863
Protection class IP 65: Dust and water jet proof according to DIN 40050 / IEC 529
Measuring range 100-125 mm
frame painted
Clamp depth (C) 82 mm, dimension A=10 mm, dimension L=133 mm
with clamping wheel
with ratchet
ON/OFF button
Zero setting is possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
without data output
with setting standard
with ID number
with operating instructions
Weight: 0.85 kg
in case / box

189,00 EUR

Comparison plate set for Shore durometer D

Order-No. 936.101D

for checking the actual condition of Shore durometers (hardness testers)
with type D (not suitable for durometer calibration)
3 test samples with nominal hardness:
33, 49, 92 HD (± 2)
in storage box

65,00 EUR

Comparison plate set for Shore durometer A + AO

Order-No. 936.101A-AO

for checking the actual condition of Shore durometers (hardness testers)
with type A or AO (not suitable for durometer calibration)
7 test samples with nominal hardness:
36, 42, 55, 67, 75, 85, 94 HA (± 2)
in storage box

86,00 EUR

SMT-MESSZEUGE Article-No. 511.300 close-up view

Assembling Straight Edge 3000 x 150 x 80 mm Aluminum

Order No. 511.300 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
with weight-reducing holes
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 83 µm (0.083 mm) = degree 2
parallelism (max. deviation) 83 µm (0.083 mm)
Length (L) x Height (H) x Width (B) = 3000 x 150 x 80 mm
dimension thickness D1 = 10 mm, dimension thickness D2 = 8 mm
very light, weight 21 kg

Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

849,00 EUR

SMT-MESSZEUGE Article-No. 511.250 close-up view

Assembling Straight Edge 2500 x 150 x 80 mm Aluminum

Order No. 511.250 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
with weight-reducing holes
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 46 µm (0.046 mm) = degree 1
parallelism (max. deviation) 46 µm (0.046 mm)
Length (L) x Height (H) x Width (B) = 2500 x 150 x 80 mm
dimension thickness D1 = 10 mm, dimension thickness D2 = 8 mm
very light, weight 17.5 kg

Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

698,00 EUR

SMT-MESSZEUGE Article-No. 511.200 close-up view

Assembling Straight Edge 2000 x 100 x 40 mm Aluminum

Order No. 511.200 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
with weight-reducing holes
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 37 µm (0.037 mm) = degree 1
parallelism (max. deviation) 37 µm (0.037 mm)
Length (L) x Height (H) x Width (B) = 2000 x 100 x 40 mm
dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
very light, weight 6 kg and handy

Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

298,00 EUR

SMT-MESSZEUGE Article-No. 511.150 close-up view

Assembling Straight Edge 1500 x 100 x 40 mm Aluminum

Order No. 511.150 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
with weight-reducing holes
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 29 µm (0.029 mm) = degree 1
parallelism (max. deviation) 29 µm (0.029 mm)
Length (L) x Height (H) x Width (B) = 1500 x 100 x 40 mm
dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
very light, weight 4.5 kg and handy

Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

235,00 EUR

SMT-MESSZEUGE Article-No. 511.100 close-up view

Assembling Straight Edge 1000 x 100 x 40 mm Aluminum

Order No. 511.100 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 12 µm (0.012 mm) = degree 0
parallelism (max. deviation) 12 µm (0.012 mm)
Length (L) x Height (H) x Width (B) = 1000 x 100 x 40 mm
dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
very light, weight 3 kg and handy

125,00 EUR

SMT-MESSZEUGE Article-No. 511.075 close-up view

Assembling Straight Edge 750 x 60 x 30 mm Aluminum

Order No. 511.075 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 9.5 µm (0.0095 mm) = degree 0
parallelism (max. deviation) 9.5 µm (0.0095 mm)
Length (L) x Height (H) x Width (B) = 750 x 60 x 30 mm
dimension thickness D1 = 6 mm, dimension thickness D2 = 4 mm
very light, weight 1.2 kg and handy

75,00 EUR

SMT-MESSZEUGE Article-No. 511.050 close-up view

Assembling Straight Edge 500 x 60 x 30 mm Aluminum

Order No. 511.050 WORKSHOP VERSION !!

lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
made of aluminum-magnesium alloy with a hardness of HV 80
yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
test surfaces scraped
flatness tolerance (max. deviation) 7 µm (0.007 mm) = degree 0
parallelism (max. deviation) 7 µm (0.007 mm)
Length (L) x Height (H) x Width (B) = 500 x 60 x 30 mm
dimension thickness D1 = 6 mm, dimension thickness D2 = 4 mm
very light, weight 0.8 kg and handy

39,00 EUR