Assembling Straight Edge

Use of assembling straight edge

An assembly ruler is a robust, precision-ground ruler that is used in particular for aligning, straightening, and checking machines and devices or workpieces - especially over long distances. The contact surface of the assembly ruler is also used in combination with a precision spirit level, which is also available in the SHOP in analog or digital form.
 

Lengths and accuracies of assembling straight edge

In our measuring equipment store, we offer assembly rulers in lengths from 500 to 6000 mm in accordance with DIN 874 with an accuracy of 0 or 1. Detailed information regarding the accuracy of the mounting rulers can be found in the respective product descriptions. The mounting rulers are also characterized by their height and width, which serve as a support surface for precision alignment scales.
 

Deflection of assembling straight edge

Please note that the lowest possible deflection must be achieved when using the mounting ruler in order to ensure maximum precision.
You will find a detailed, illustrated description under the product.
 

Assembling straight edges, materials, and custom-made products

If required, we can also produce special mounting rulers with individual lengths in steel or aluminum with a hard-coat finish.


Inexpensive assembling straight edge
In addition, inexpensive and lightweight mounting rulers made of aluminum-magnesium alloy with scraped test surfaces are available.
 

SMT-MESSZEUGE Article-No. 511.050 close-up view
NEW
Assembling Straight Edge 500 x 60 x 30 mm Aluminum
Order No. 511.050 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 7 µm (0.007 mm) = degree 0
  • parallelism (max. deviation) 7 µm (0.007 mm)
  • Length (L) x Height (H) x Width (B) = 500 x 60 x 30 mm
    dimension thickness D1 = 6 mm, dimension thickness D2 = 4 mm
  • very light, weight 0.8 kg and handy
39,00 EUR
plus 19% tax excl. Shipping costs
Assembling Straight Edge 500 x 80 x 40 mm DIN 874/0
Assembling Straight Edge 500 x 80 x 40 mm DIN 874/0
Order-No. 509.050
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 7 µm (0,007 mm)
  • Length (L) x Height (h) x Width (b) = 500 x 80 x 40 mm
  • extra wide measuring faces 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • low weight 2 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminium. Please send your inquiry by e-mail.

390,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_assebling_straight_edges_510050
Assembling Straight Edge 500 x 80 x 40 mm DIN 874/1
Order-No. 510.050
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 12 µm (0,012 mm)
  • Length (L) x Height (h) x Width (b) = 500 x 80 x 40 mm
  • extra wide measuring faces 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • low weight 2 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminium. Please send your inquiry by e-mail.

315,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509051
Assembling Straight Edge 500 x 100 x 30 mm DIN 874/0
Order-No. 509.051
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 7 µm (0,007 mm)
  • Length (L) x Height (h) x Width (b) = 500 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 3 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

355,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510051
Assembling Straight Edge 500 x 100 x 30 mm DIN 874/1
Order-No. 510.051
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 12 µm (0,012 mm)
  • Length (L) x Height (h) x Width (b) = 500 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 3 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

315,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.075 close-up view
NEW
Assembling Straight Edge 750 x 60 x 30 mm Aluminum
Order No. 511.075 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 9.5 µm (0.0095 mm) = degree 0
  • parallelism (max. deviation) 9.5 µm (0.0095 mm)
  • Length (L) x Height (H) x Width (B) = 750 x 60 x 30 mm
    dimension thickness D1 = 6 mm, dimension thickness D2 = 4 mm
  • very light, weight 1.2 kg and handy
75,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509075
Assembling Straight Edge 750 x 80 x 40 mm DIN 874/0
Order-No. 509.075
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 9,5 µm (0,0095 mm)
  • Length (L) x Height (h) x Width (b) = 750 x 80 x 40 mm
  • extra wide measuring faces 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 3,5 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

430,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510075
Assembling Straight Edge 750 x 80 x 40 mm DIN 874/1
Order-No. 510.075
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 16,5 µm (0,0165 mm)
  • Length (L) x Height (h) x Width (b) = 750 x 80 x 40 mm
  • extra wide measuring faces 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 3,5 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

370,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509076
Assembling Straight Edge 750 x 100 x 30 mm DIN 874/0
Order-No. 509.076
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 9,5 µm (0,0095 mm)
  • Length (L) x Height (h) x Width (b) = 750 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 4 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

400,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510076
Assembling Straight Edge 750 x 100 x 30 mm DIN 874/1
Order-No. 510.076
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 16,5 µm (0,0165 mm)
  • Length (L) x Height (h) x Width (b) = 750 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 4 kg, very handy

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

340,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.100 close-up view
NEW
Assembling Straight Edge 1000 x 100 x 40 mm Aluminum
Order No. 511.100 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 12 µm (0.012 mm) = degree 0
  • parallelism (max. deviation) 12 µm (0.012 mm)
  • Length (L) x Height (H) x Width (B) = 1000 x 100 x 40 mm
    dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
  • very light, weight 3 kg and handy
125,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509100
Assembling Straight Edge 1000 x 100 x 30 mm DIN 874/0
Order-No. 509.100
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 12 µm (0,012 mm)
  • Length (L) x Height (h) x Width (b) = 1000 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 5 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.


For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

505,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510100
Assembling Straight Edge 1000 x 100 x 30 mm DIN 874/1
Order-No. 510.100
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 21 µm (0,021 mm)
  • Length (L) x Height (h) x Width (b) = 1000 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 5 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.


For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

430,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509101
Assembling Straight Edge 1000 x 160 x 50 mm DIN 874/0
Order-No. 509.101
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 12 µm (0,012 mm)
  • Length (L) x Height (h) x Width (b) = 1000 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 12 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.


For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

645,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510101
Assembling Straight Edge 1000 x 160 x 50 mm DIN 874/1
Order-No. 510.101
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 21 µm (0,021 mm)
  • Length (L) x Height (h) x Width (b) = 1000 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 12 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.


For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

550,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.150 close-up view
NEW
Assembling Straight Edge 1500 x 100 x 40 mm Aluminum
Order No. 511.150 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • with weight-reducing holes
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 29 µm (0.029 mm) = degree 1
  • parallelism (max. deviation) 29 µm (0.029 mm)
  • Length (L) x Height (H) x Width (B) = 1500 x 100 x 40 mm
    dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
  • very light, weight 4.5 kg and handy
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.
235,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509150
Assembling Straight Edge 1500 x 100 x 30 mm DIN 874/0
Order-No. 509.150
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 17 µm (0,017 mm)
  • Length (L) x Height (h) x Width (b) = 1500 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 7,5 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.
 

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

610,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510150
Assembling Straight Edge 1500 x 100 x 30 mm DIN 874/1
Order-No. 510.150
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 29 µm (0,029 mm)
  • Length (L) x Height (h) x Width (b) = 1500 x 100 x 30 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 7,5 kg, very handy
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

570,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509151
Assembling Straight Edge 1500 x 160 x 50 mm DIN 874/0
Order-No. 509.151
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 17 µm (0,017 mm)
  • Length (L) x Height (h) x Width (b) = 1500 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 18 kg, very handy
Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

885,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510151
Assembling Straight Edge 1500 x 160 x 50 mm DIN 874/1
Order-No. 510.151
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 29 µm (0,029 mm)
  • Length (L) x Height (h) x Width (b) = 1500 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 18 kg, very handy
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

730,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.200 close-up view
NEW
Assembling Straight Edge 2000 x 100 x 40 mm Aluminum
Order No. 511.200 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • with weight-reducing holes
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 37 µm (0.037 mm) = degree 1
  • parallelism (max. deviation) 37 µm (0.037 mm)
  • Length (L) x Height (H) x Width (B) = 2000 x 100 x 40 mm
    dimension thickness D1 = 8 mm, dimension thickness D2 = 6 mm
  • very light, weight 6 kg and handy
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.
298,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509200
Assembling Straight Edge 2000 x 120 x 40 mm DIN 874/0
Order-No. 509.200
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 22 µm (0,022 mm)
  • Length (L) x Height (h) x Width (b) = 2000 x 120 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 15 kg
​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

795,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510200
Assembling Straight Edge 2000 x 120 x 40 mm DIN 874/1
Order-No. 510.200
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 37 µm (0,037 mm)
  • Length (L) x Height (h) x Width (b) = 2000 x 120 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 15 kg
​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

770,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509201
Assembling Straight Edge 2000 x 160 x 50 mm DIN 874/0
Order-No. 509.201
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 22 µm (0,022 mm)
  • Length (L) x Height (h) x Width (b) = 2000 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 24 kg
​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.125,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510201
Assembling Straight Edge 2000 x 160 x 50 mm DIN 874/1
Order-No. 510.201
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 37 µm (0,037 mm)
  • Length (L) x Height (h) x Width (b) = 2000 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 24 kg
​​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

950,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.250 close-up view
NEW
Assembling Straight Edge 2500 x 150 x 80 mm Aluminum
Order No. 511.250 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • with weight-reducing holes
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 46 µm (0.046 mm) = degree 1
  • parallelism (max. deviation) 46 µm (0.046 mm)
  • Length (L) x Height (H) x Width (B) = 2500 x 150 x 80 mm
    dimension thickness D1 = 10 mm, dimension thickness D2 = 8 mm
  • very light, weight 17.5 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.
698,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509250
Assembling Straight Edge 2500 x 120 x 40 mm DIN 874/0
Order-No. 509.250
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 27 µm (0,027 mm)
  • Length (L) x Height (h) x Width (b) = 2500 x 120 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 19 kg
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.095,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510250
Assembling Straight Edge 2500 x 120 x 40 mm DIN 874/1
Order-No. 510.250
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 46 µm (0,046 mm)
  • Length (L) x Height (h) x Width (b) = 2500 x 120 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 19 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.035,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509251
Assembling Straight Edge 2500 x 160 x 50 mm DIN 874/0
Order-No. 509.251
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 27 µm (0,027 mm)
  • Length (L) x Height (h) x Width (b) = 2500 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 30 kg
​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.595,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510251
Assembling Straight Edge 2500 x 160 x 50 mm DIN 874/1
Order-No. 510.251
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 46 µm (0,046 mm)
  • Length (L) x Height (h) x Width (b) = 2500 x 160 x 50 mm
  • extra wide measuring faces 50 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 30 kg
​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.195,00 EUR
plus 19% tax excl. Shipping costs
SMT-MESSZEUGE Article-No. 511.300 close-up view
NEW
Assembling Straight Edge 3000 x 150 x 80 mm Aluminum
Order No. 511.300 WORKSHOP VERSION !!
  • lightweight aluminum assembling straight edge with double-T cross-section (I-shaped)
  • with weight-reducing holes
  • made of aluminum-magnesium alloy with a hardness of HV 80
    yield strength: 110 kg/mm2, tensile strength: 47 kg/mm2
  • test surfaces scraped
  • flatness tolerance (max. deviation) 83 µm (0.083 mm) = degree 2
  • parallelism (max. deviation) 83 µm (0.083 mm)
  • Length (L) x Height (H) x Width (B) = 3000 x 150 x 80 mm
    dimension thickness D1 = 10 mm, dimension thickness D2 = 8 mm
  • very light, weight 21 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.
849,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509300
Assembling Straight Edge 3000 x 140 x 40 mm DIN 874/0
Order-No. 509.300
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 32 µm (0,032 mm)
  • Length (L) x Height (h) x Width (b) = 3000 x 140 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 26 kg
​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.295,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510300
Assembling Straight Edge 3000 x 140 x 40 mm DIN 874/1
Order-No. 510.300
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 54 µm (0,054 mm)
  • Length (L) x Height (h) x Width (b) = 3000 x 140 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 26 kg
​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.250,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509301
Assembling Straight Edge 3000 x 180 x 60 mm DIN 874/0
Order-No. 509.301
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 32 µm (0,032 mm)
  • Length (L) x Height (h) x Width (b) = 3000 x 180 x 60 mm
  • extra wide measuring faces 60 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 45,5 kg
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

2.225,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510301
Assembling Straight Edge 3000 x 180 x 60 mm DIN 874/1
Order-No. 510.301
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 54 µm (0,054 mm)
  • Length (L) x Height (h) x Width (b) = 3000 x 180 x 60 mm
  • extra wide measuring faces 60 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 45,5 kg
​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.825,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509400
Assembling Straight Edge 4000 x 140 x 40 mm DIN 874/0
Order-No. 509.400
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 42 µm (0,042 mm)
  • Length (L) x Height (h) x Width (b) = 4000 x 140 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 35 kg
​​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.859,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510400
Assembling Straight Edge 4000 x 140 x 40 mm DIN 874/1
Order-No. 510.400
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 71 µm (0,071 mm)
  • Length (L) x Height (h) x Width (b) = 4000 x 140 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 35 kg
​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

1.695,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509401
Assembling Straight Edge 4000 x 180 x 60 mm DIN 874/0
Order-No. 509.401
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 42 µm (0,042 mm)
  • Length (L) x Height (h) x Width (b) = 4000 x 180 x 60 mm
  • extra wide measuring faces 60 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 60,5 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

2.925,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510401
Assembling Straight Edge 4000 x 180 x 60 mm DIN 874/1
Order-No. 510.401
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 71 µm (0,071 mm)
  • Length (L) x Height (h) x Width (b) = 4000 x 180 x 60 mm
  • extra wide measuring faces 60 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • leight weight 60,5 kg
​​​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

2.315,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509500
Assembling Straight Edge 5000 x 160 x 40 mm DIN 874/0
Order-No. 509.500
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 52 µm (0,052 mm)
  • Length (L) x Height (h) x Width (b) = 5000 x 160 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 53 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

3.089,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510500
Assembling Straight Edge 5000 x 160 x 40 mm DIN 874/1
Order-No. 510.500
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 87 µm (0,087 mm)
  • Length (L) x Height (h) x Width (b) = 5000 x 160 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 53 kg
​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

2.795,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509501
Assembling Straight Edge 5000 x 200 x 80 mm DIN 874/0
Order-No. 509.501
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 52 µm (0,052 mm)
  • Length (L) x Height (h) x Width (b) = 5000 x 200 x 80 mm
  • extra wide measuring faces 80 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 102 kg
​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

4.750,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510501
Assembling Straight Edge 5000 x 200 x 80 mm DIN 874/1
Order-No. 510.501
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 87 µm (0,087 mm)
  • Length (L) x Height (h) x Width (b) = 5000 x 200 x 80 mm
  • extra wide measuring faces 80 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 102 kg
​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

3.850,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509600
Assembling Straight Edge 6000 x 160 x 40 mm DIN 874/0
Order-No. 509.600
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 62 µm (0,062 mm)
  • Length (L) x Height (h) x Width (b) = 6000 x 160 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 65 kg
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

3.380,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510600
Assembling Straight Edge 6000 x 160 x 40 mm DIN 874/1
Order-No. 510.600
  • with measuring faces for application of precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 104 µm (0,104 mm)
  • Length (L) x Height (h) x Width (b) = 6000 x 160 x 40 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 65 kg
​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

3.125,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_509601
Assembling Straight Edge 6000 x 200 x 80 mm DIN 874/0
Order-No. 509.601
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 0
    flatness tolerance 62 µm (0,062 mm)
  • Length (L) x Height (h) x Width (b) = 6000 x 200 x 80 mm
  • extra wide measuring faces 80 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 122 kg
​​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

5.850,00 EUR
plus 19% tax excl. Shipping costs
smt-messzeuge_510601
Assembling Straight Edge 6000 x 200 x 80 mm DIN 874/1
Order-No. 510.601
  • with extra wide flat sides for resting precision spirit levels
  • I-shaped cross section
  • made of I-form steel
  • with weight reducing holes
  • high rigidity, low deflection
  • test measuring surfaces extra fine ground
  • flat sides fine ground
  • lacquered middle part
  • to DIN 874 Page 1 Accuracy 1
    flatness tolerance 104 µm (0,104 mm)
  • Length (L) x Height (h) x Width (b) = 6000 x 200 x 80 mm
  • extra wide measuring faces 80 mm
  • with identification-number
  • inclusive workshop test-calibration-certificate
  • weight 122 kg
​​​​Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For mechanical Engineering and plant engineering.

You need a special assembling straight edge? We manufacture your assembling straight edge
to your specification with special cross-section also in aluminum. Please send your inquiry by e-mail.

4.750,00 EUR
plus 19% tax excl. Shipping costs
1 to 47 (from a total of 47)