Steel ruler, INOX, rigid pattern, 150x19x1,0 mm
Steel ruler, INOX, rigid pattern, 150x19x1,0 mm
Steel ruler, INOX, rigid pattern, 150x19x1,0 mm

Steel ruler, INOX, rigid pattern, 150x19x1,0 mm

Product No.:
532.015
Shipping time:
approximately 3 - 7 Days approximately 3 - 7 Days (abroad may vary)
Shipping weight:
0.01 kg per piece
1,40 EUR

plus 19% tax excl. Shipping costs

Add to wish list
Description
532.015
  • made of stainless steel
  • with mm and 1/2 mm scale

Customers who bought this product bought also the following products:

Thickness gauge, spring closed, 0 - 25 mm, throat depth 25 mm
Thickness gauge, spring closed, 0 - 25 mm, throat depth 25 mm
253.026
  • rode and disc made of stainless steel
  • frame made of case iron
  • spring closed
  • with digital display, mm/inch switchable
  • reading 0.01 mm
  • throat depth 25 mm
  • in case / box
88,00 EUR
smt-messzeuge_505050
Straight Edges stainless steel (Inox) 500 x 40 x 8 mm DIN 874/1
Order-No. 505.050
  • Steel Straight Edges for accurate test and straightening work
  • made of high quality stainless steel (Inox)
  • rectangular cross-section
  • all flat sides and edges finely ground
  • Testing edges (measuring area) finely ground
  • Measuring surface 1 is specially marked
  • Manufacture and testing according to DIN 874/1 Page 1 Accuracy GG 1
    Flatness tolerance of testing edges 12 µm (0,012 mm)
    For the flatness tolerance of the side faces of the triple value applies
    For the parallelism tolerance of the measuring faces each other twice the value applies
    For the parallelism of the surfaces of the sixfold value applies
    For the rectangularity tolerance of the side surfaces to the measuring surface of the three-fold value is
    An edge drop at a distance of 0,5 mm from the edges is permitted
  • Length (L) x Height (h) x Width (b) = 500 x 40 x 8 mm
  • Cross-sections and dimensions of the starting material
  • with identification-number
  • inclusive workshop calibration-certificate
  • weight 1,3 kg

For testing the flatness of surfaces.

109,00 EUR
Control square with heavy base, 150 x 100 mm
Control square with heavy base, 150 x 100 mm
130.150
  • carbon steel
  • DIN 875/2
Remaining stock !! Only valid while stocks last !!
25,50 EUR