Measuring wedge 0,5 - 11 mm, steel, with a long knurled handle

Product No.:: 630.005
Shipping time:: approximately 3 - 5 days (abroad may vary)
Stock:: 15 pieces
Weight:: 0.087 kg per piece

19,95 EUR

plus 19% tax excl. Shipping costs

Description

Description

Order-No. 630.005

measuring wedge gauge (taper slot gauge wedge-shaped)
made of steel, ground on all sides
satin chromed for glare-free reading
with long knurled handle, length approx. 52 mm
with two graduation on the measuring wedge
reading 0,1 mm + 0,05 mm
measuring range 0,5 - 11 mm
dimensions approx. 200 x 12 x 8 mm
weight 0,087 kg

The measuring wedge gauge (tapered slot gauge) is used
for quick measurement and control of gaps, slots, slits grooves, distances etc.

On request we also manufacture the following special taper slot gauges:
special dimensions according to drawings, special scaling of the wedge gauge !
Also possible in aluminium or brass ! Please inquiry by e-mail !!

Customers who bought this product bought also the following products:

Vernier caliper with round depth gauge, 150x0,05 mm

Order-No. 300.150

made of stainless steel
satin chrome finished, hardened
4-way measurements
backside with screw table
in case / box

20,90 EUR

Feeler Gauge 20 blades 0,05-1,00 mm length 100 mm

Order-No. 603.100.C

from hardened spring steel
blades tapered (conical)
20 Blades
length 100 mm
width 12,7 mm
measuring range 0,05 - 1,00 mm
Set combination:
0,05 / 0,10 / 0,15 / 0,20 / 0,25 / 0,30 / 0,35 / 0,40 / 0,45 / 0,50 /
0,55 / 0,60 / 0,65 / 0,70 / 0,75 / 0,80 / 0,85 / 0,90 / 0,95 / 1,00 mm
in nickel plated case with set screw
manufacture standard 12 µm

For checking gaps, contact distances, adjust valve clearance, etc.

2,95 EUR

Steel Straight Edges tool steel 1000 x 40 x 8 mm DIN 874/2

Order-No. 506.100

Straight Edges for straightening
made of high quality special steel
rectangular cross-section
all flat sides and edges finely ground
Testing edges (measuring area) finely ground
Measuring surface 1 is specially marked
Manufacture and testing according to DIN 874/2 Page 1 Accuracy GG 2
Flatness tolerance of testing edges 33 µm (0,033 mm)
For the flatness tolerance of the side faces of the triple value applies
For the parallelism tolerance of the measuring faces each other twice the value applies
For the parallelism of the surfaces of the sixfold value applies
For the rectangularity tolerance of the side surfaces to the measuring surface of the three-fold value is
An edge drop at a distance of 0,5 mm from the edges is permitted
Length (L) x Height (h) x Width (b) = 1000 x 40 x 8 mm
Cross-sections and dimensions of the starting material
with identification-number
inclusive workshop calibration-certificate
weight 2.3 kg

Note: this item no. cannot be ordered via the SHOP!
You are welcome to inquire about current freight costs
(over length) and packaging costs (transport wooden box) by e-mail.

For testing the flatness of surfaces.

79,00 EUR