Main page » Measuring Tools / Instruments » 9. Thickness Gauges » Dial Caliper for Internal Measurement

Dial Caliper for Internal Measurement

Caliper gauge for inside measurements, 5 - 15 mm

730.015

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

135,00 EUR

plus 19% tax excl. Shipping costs

Caliper gauge for inside measurements, 5 - 25 mm

730.025

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

142,00 EUR

plus 19% tax excl. Shipping costs

Caliper gauge for inside measurements, 10 - 30 mm

730.030

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

152,00 EUR

plus 19% tax excl. Shipping costs

Caliper gauge for inside measurements, 20 - 40 mm

730.040

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

155,00 EUR

plus 19% tax excl. Shipping costs

Caliper gauge for inside measurements, 30 - 50 mm

730.050

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

159,00 EUR

plus 19% tax excl. Shipping costs

Caliper gauge for inside measurements, 40 - 60 mm

730.060

for measuring bores, internal groove and other hard to read inside dimension
with round contact point
reading 0,01 mm
in case / box

162,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 5-15 mm

Article no. 723.015

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 5 - 15 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.02 mm
with rounded measuring surfaces (contact point) R 0.3 mm
measuring depth dimension (L) 20 mm
dimension (A) 1 mm
dimension (B) 1.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

148,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 5-25 mm

Article no. 723.250

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 5 - 25 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.03 mm
with rounded measuring surfaces (contact point) R 0.3 mm
measuring depth dimension (L) 35 mm
dimension (A) 1 mm
dimension (B) 1.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

168,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 10-30 mm

Article no. 723.300

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 10 - 30 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.03 mm
with rounded measuring surfaces (contact point) R 0.5 mm
measuring depth dimension (L) 55 mm
dimension (A) 2.5 mm
dimension (B) 3.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

175,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 20-40 mm

Article no. 723.400

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 20 - 40 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.03 mm
with rounded measuring surfaces (contact point) R 0.5 mm
measuring depth dimension (L) 80 mm
dimension (A) 3 mm
dimension (B) 6.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

183,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 30-50 mm

Article no. 723.500

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 30 - 50 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.03 mm
with rounded measuring surfaces (contact point) R 0.5 mm
measuring depth dimension (L) 80 mm
dimension (A) 3 mm
dimension (B) 8.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

189,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge for inside measurements 40-60 mm

Article no. 723.600

inside quick measuring device with digital dial gauge
with large digital rotating LCD
with large reading digits 7 mm
measuring range (measuring span) 40 - 60 mm
digital resolution (reading) 0.005 mm
accuracy according to factory standard ± 0.03 mm
with rounded measuring surfaces (contact point) R 0.5 mm
measuring depth dimension (L) 80 mm
dimension (A) 3 mm
dimension (B) 8.5 mm
ON/OFF button
Zero setting possible at any position
MM/INCH button switchable
SET button (setting procedure)
ABS/INC button (absolute measurement / relative measurement)
with button cell CR 2032 voltage 3V (measuring system 3V)
with ID number
with operating instructions
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

259,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge 5-15 mm, for inside measurements, reading 0.002 mm, IP65

155,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge 10-30 mm, for inside measurements, reading 0.005 mm, IP65

168,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge 30-50 mm, for inside measurements, reading 0.005 mm, IP65

178,00 EUR

plus 19% tax excl. Shipping costs

Digital caliper gauge 50-100 mm, for inside measurements, reading 0.01 mm, IP65

205,00 EUR

plus 19% tax excl. Shipping costs

Digital internal quick probe 15-35 mm with handgrip

Article no. 734.003

inside quick measuring device with digital dial gauge and handgrip
with large, long lifting device for easy handling
measuring range (measuring span) 15 - 35 mm
digital resolution (reading) 0.001 mm
accuracy according to factory standard ± 0.02 mm
with hardened ball probe Ø 2 mm
measuring depth dimension (L) 50 mm
built-in digital dial gauge with Protection class IP65
display with scale bar, mm/inch, 0/off, preset button, tol button, +/- button
with button cell CR 2032 voltage 3V (measuring system 3V)
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

150,00 EUR

plus 19% tax excl. Shipping costs

Digital internal quick probe 35-55 mm with handgrip

Article no. 734.005

inside quick measuring device with digital dial gauge and handgrip
with large, long lifting device for easy handling
measuring range (measuring span) 35 - 55 mm
digital resolution (reading) 0.001 mm
accuracy according to factory standard ± 0.03 mm
with hardened ball probe Ø 2 mm
measuring depth dimension (L) 80 mm
built-in digital dial gauge with Protection class IP65
display with scale bar, mm/inch, 0/off, preset button, tol button, +/- button
with button cell CR 2032 voltage 3V (measuring system 3V)
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

150,00 EUR

plus 19% tax excl. Shipping costs

Digital internal quick probe 55-75 mm with handgrip

Article no. 734.007

inside quick measuring device with digital dial gauge and handgrip
with large, long lifting device for easy handling
measuring range (measuring span) 55 - 75 mm
digital resolution (reading) 0.001 mm
accuracy according to factory standard ± 0.03 mm
with hardened ball probe Ø 2 mm
measuring depth dimension (L) 90 mm
built-in digital dial gauge with Protection class IP65
display with scale bar, mm/inch, 0/off, preset button, tol button, +/- button
with button cell CR 2032 voltage 3V (measuring system 3V)
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

165,00 EUR

plus 19% tax excl. Shipping costs

Digital internal quick probe 75-95 mm with handgrip

Article no. 734.009

inside quick measuring device with digital dial gauge and handgrip
with large, long lifting device for easy handling
measuring range (measuring span) 75 - 95 mm
digital resolution (reading) 0.001 mm
accuracy according to factory standard ± 0.03 mm
with hardened ball probe Ø 2 mm
measuring depth dimension (L) 100 mm
built-in digital dial gauge with Protection class IP65
display with scale bar, mm/inch, 0/off, preset button, tol button, +/- button
with button cell CR 2032 voltage 3V (measuring system 3V)
in case / box

For measuring internal bores, internal grooves or other internal measuring points that are difficult to access !

165,00 EUR

plus 19% tax excl. Shipping costs

1 to 20 (from a total of 20)