Main page » Measuring Tools / Instruments » 5. Micrometer / Special Micrometer » Micrometer with large anvil

Micrometer with large anvil

Article no. 427.025

spindle thread hardened and ground
glare-free matt chrome-plated reading parts
Micrometer with large anvil for thickness measurement on disk cutters
Anvil: width (A) 50 mm, height = 14 mm, depth = 13.5 mm; measuring spindle Ø 6.5 mm, with carbide measuring surface
thread pitch 0.5 mm
reading 0.01 mm
accuracy to factory standard 0.005 mm
Measuring range 0-25 mm
Clamp depth (C) 26 mm
painted clamp
with an insulating plate (heat protection plates)
with clamping lever
with feeler ratchet
with a hook wrench for readjustment
with ID number
in case/box

Larger measuring ranges on request! Please send us your request by mail!

158,00 EUR

Article no. 427.050

spindle thread hardened and ground
glare-free matt chrome-plated reading parts
Micrometer with large anvil for thickness measurement on disk cutters
Anvil: width (A) 60 mm, height = 14 mm, depth = 13.5 mm; measuring spindle Ø 6.5 mm, with carbide measuring surface
thread pitch 0.5 mm
reading 0.01 mm
accuracy to factory standard 0.005 mm
Measuring range 25-50 mm
Clamp depth (C) 38 mm
painted clamp
with an insulating plate (heat protection plates)
with clamping lever
with feeler ratchet
with a hook wrench for readjustment
with ID number
in case/box

Larger measuring ranges on request! Please send us your request by mail!

195,00 EUR

Article no. 285.026

Spindle thread hardened and ground
Anti-glare matt chrome-plated reading parts
Digital micrometer with large anvil for thickness measurement on disk cutters
Anvil: width (A) 50 mm, height = 14 mm, depth = 13.5 mm
Measuring spindle Ø 6.5 mm with carbide measuring surface
with large digital LCD
with large reading digits 7 mm
Digital reading 0.001 mm
accuracy to factory standard 0.005 mm
Protection class IP 65: Dust and water jet protected in accordance with DIN 40050 / IEC 529
Measuring range 0-25 mm
Clamp depth (C) 26 mm
Painted clamp
with an insulating plate (heat protection plates)
with clamping wheel
with feeler ratchet
ON/OFF button
Zero setting possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement/relative measurement)
with button cell LR44, Voltage 1.5V
without data output
with ID number
with operating instructions
in case/box

249,00 EUR

Article no. 285.051

Spindle thread hardened and ground
Anti-glare matt chrome-plated reading parts
Digital micrometer with large anvil for thickness measurement on disk cutters
Anvil: width (A) 60 mm, height = 14 mm, depth = 13.5 mm
Measuring spindle Ø 6.5 mm with carbide measuring surface
with large digital LCD
with large reading digits 7 mm
Digital reading 0.001 mm
accuracy to factory standard 0.005 mm
Protection class IP 65: Dust and water jet protected in accordance with DIN 40050 / IEC 529
Measuring range 25-50 mm
Clamp depth (C) 38 mm
Painted clamp
with an insulating plate (heat protection plates)
with clamping wheel
with feeler ratchet
ON/OFF button
Zero setting possible at any position
UNIT button (MM/INCH)
SET button (setting procedure)
ABS/INC button (absolute measurement/relative measurement)
with button cell LR44, Voltage 1.5V
without data output
with ID number
with operating instructions
in case/box

269,00 EUR

1 to 4 (from a total of 4)