Hint:


===> NEW in the SHOP !! Certification of Measuring Tools <===

 


 

Accessories Dial Indicator

Extension rod for dial caliper, 10 mm
Extension rod for dial caliper, 10 mm
764.010
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 15 mm
Extension rod for dial caliper, 15 mm
764.015
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 20 mm
Extension rod for dial caliper, 20 mm
764.020
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 25 mm
Extension rod for dial caliper, 25 mm
764.025
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 30 mm
Extension rod for dial caliper, 30 mm
764.030
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 35 mm
Extension rod for dial caliper, 35 mm
764.035
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 40 mm
Extension rod for dial caliper, 40 mm
764.040
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 45 mm
Extension rod for dial caliper, 45 mm
764.045
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 50 mm
Extension rod for dial caliper, 50 mm
764.050
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 55 mm
Extension rod for dial caliper, 55 mm
764.055
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 60 mm
Extension rod for dial caliper, 60 mm
764.060
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 65 mm
Extension rod for dial caliper, 65 mm
764.065
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 70 mm
Extension rod for dial caliper, 70 mm
764.070
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 75 mm
Extension rod for dial caliper, 75 mm
764.075
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 80 mm
Extension rod for dial caliper, 80 mm
764.080
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 85 mm
Extension rod for dial caliper, 85 mm
764.085
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 90 mm
Extension rod for dial caliper, 90 mm
764.090
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 95 mm
Extension rod for dial caliper, 95 mm
764.095
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, 100 mm
Extension rod for dial caliper, 100 mm
764.100
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
3,15 EUR
plus 19% tax excl. Shipping costs
Extension rod for dial caliper, set, 10 - 100 mm
Extension rod for dial caliper, set, 10 - 100 mm
764.001
  • for dial indicator with M 2,5 thread
  • made of stainless steel, Ø = 4.5 mm
22,50 EUR
plus 19% tax excl. Shipping costs
Depth Measuring Base, 50 x 16 x 34 mm
NEW
Depth Measuring Base, 50 x 16 x 34 mm
Article-No. 769.005 WORKSHOP VERSION !!
  • suitable for all dial gauges with clamping shaft Ø 8 h6
  • extensions for the measuring pin may be required for the dial gauge to be used,,
    so that the entire measuring range of the dial gauge can be used (optionally available)
  • satin chrome finished measuring bridge L x W = 50 x 16 mm / total height 34 mm
  • measuring surface ground and lapped
  • Fixing of the dial gauge by means of knurled screw
  • accuracy according to factory standard
25,00 EUR
plus 19% tax excl. Shipping costs
Depth Measuring Base, 63 x 16 x 34 mm
Depth Measuring Base, 63 x 16 x 34 mm
Article-No. 769.063 WORKSHOP VERSION !!
  • suitable for all dial gauges with clamping shaft Ø 8 h6
  • extensions for the measuring pin may be required for the dial gauge to be used,,
    so that the entire measuring range of the dial gauge can be used (optionally available)
  • satin chrome finished measuring bridge L x W = 63 x 16 mm / total height 34 mm
  • measuring surface ground and lapped
  • Fixing of the dial gauge by means of knurled screw
  • accuracy according to factory standard
29,00 EUR
plus 19% tax excl. Shipping costs
Depth Measuring Base, 102 x 17 x 37 mm
SOLD OUT
Depth Measuring Base, 102 x 17 x 37 mm
Article-No. 769.100 WORKSHOP VERSION !!
  • suitable for all dial gauges with clamping shaft Ø 8 h6
  • extensions for the measuring pin may be required for the dial gauge to be used,,
    so that the entire measuring range of the dial gauge can be used (optionally available)
  • satin chrome finished measuring bridge L x W = 102 x 17 mm / total height 37 mm
  • measuring surface ground and lapped
  • Fixing of the dial gauge by means of knurled screw
  • accuracy according to factory standard
32,00 EUR
plus 19% tax excl. Shipping costs
Depth Measuring Base, 150 x 16 x 37 mm
Depth Measuring Base, 150 x 16 x 37 mm
Article-No. 769.150 WORKSHOP VERSION !!
  • suitable for all dial gauges with clamping shaft Ø 8 h6
  • extensions for the measuring pin may be required for the dial gauge to be used,,
    so that the entire measuring range of the dial gauge can be used (optionally available)
  • satin chrome finished measuring bridge L x W = 150 x 16 mm / total height 37 mm
  • measuring surface ground and lapped
  • Fixing of the dial gauge by means of knurled screw
  • accuracy according to factory standard
38,00 EUR
plus 19% tax excl. Shipping costs
Clamping tool for dial indicator
Clamping tool for dial indicator
782.000
  • for fixing dial indicator
  • shank 8 mm
9,90 EUR
plus 19% tax excl. Shipping costs
1 to 25 (from a total of 25)