Digital Dial Indicator

• with digital LCD display, display rotatable 270°
• measuring direction reversible
• accuracy: 0.01 mm
• clamp shank 8H6

• 3 V measuring system
• with digital LCD display
• display rotatable 0 - 310°
• mm/inch, TOL, M, ABS, zero and on/off button
• clamp shank 8 h6

• 3 V measuring system
• with digital LCD display
• display rotatable 0 - 310°
• mm/inch, TOL, M, ABS, zero and on/off button
• clamp shank 8 h6

• 3 V measuring system
• with digital LCD display
• display rotatable 0 - 310°
• mm/inch, TOL, M, ABS, zero and on/off button
• clamp shank 8 h6

• 3 V measuring system
• with digital LCD display
• display rotatable 0 - 310°
• mm/inch, TOL, M, ABS, zero and on/off button
• clamp shank 8 h6

• Dial gauge with digital display and high resolution + accuracy, Absolute System
• with digital LCD display
• display rotatable 0 - 330°
• with large 7 mm reading digits
• Measuring range 12,7 mm
• digital reading 0,001 mm
• accuracy according to factory standard 2µ = 0,002 mm
• Repeat accuracy 4µ = 0,004 mm
• Measuring force ≥ 1,5 N
• measuring speed when moving: no limit !
• outside Ø 60 mm
• dimension (L1) 56 mm
• dimension (L2) 126 mm
• ON / OFF button
• ZERO / ABS button
• PRESET button (measured value presetting)
• + / - button (setting button)
• TOL button (tolerance setting button)
• MM / INCH Shift button
• ORIGIN button (setting the absolute zero point)
• measuring direction reversible
• Zero point setting possible at any position
• clamping shank Ø 8 h6
• with button cell CR 2032 voltage 3V (measuring system 3V)
• with data output RS 232 (RB6)
• flat back and additional back with plug
• with operation instruction manual
• in case / box

• 3 V measuring system
• IP 54
• with digital LCD display
• display rotatable 0 - 330°
• measuring direction reversible
• mm/inch, TOL, ABS, zero, preset and on/off button
• clamp shank 8 h6

• Dial gauge with digital display and high resolution + accuracy, Absolute System
• with digital LCD display
• display rotatable 0 - 330°
• with large 7 mm reading digits
• Measuring range 25 mm
• digital reading 0,001 mm
• accuracy according to factory standard 4µ = 0,004 mm
• Repeat accuracy 4µ = 0,004 mm
• Measuring force ≥ 1,5 N
• measuring speed when moving: no limit !
• outside Ø 60 mm
• dimension (L1) 56 mm
• dimension (L2) 131 mm
• ON / OFF button
• ZERO / ABS button
• PRESET button (measured value presetting)
• + / - button (setting button)
• TOL button (tolerance setting button)
• MM / INCH Shift button
• ORIGIN button (setting the absolute zero point)
• measuring direction reversible
• Zero point setting possible at any position
• clamping shank Ø 8 h6
• with button cell CR 2032 voltage 3V (measuring system 3V)
• with data output RS 232 (RB6)
• flat back and additional back with plug
• with operation instruction manual
• in case / box

• 3 V measuring system
• IP 54
• with digital LCD display
• display rotatable 0 - 330°
• measuring direction reversible
• mm/inch, TOL, ABS, zero, preset and on/off button
• clamp shank 8 h6

• Dial gauge with digital display and high resolution + accuracy, Absolute System
• with digital LCD display
• display rotatable 0 - 330°
• with large 7 mm reading digits
• Measuring range 50 mm
• digital reading 0,001 mm
• accuracy according to factory standard 8µ = 0,008 mm
• Repeat accuracy 5µ = 0,005 mm
• Measuring force ≥ 2,2 N
• measuring speed when moving: no limit !
• outside Ø 60 mm
• dimension (L1) 56 mm
• dimension (L2) 131 mm
• ON / OFF button
• ZERO / ABS button
• PRESET button (measured value presetting)
• + / - button (setting button)
• TOL button (tolerance setting button)
• MM / INCH Shift button
• ORIGIN button (setting the absolute zero point)
• measuring direction reversible
• Zero point setting possible at any position
• clamping shank Ø 8 h6
• with button cell CR 2032 voltage 3V (measuring system 3V)
• with data output RS 232 (RB6)
• flat back and additional back with plug
• with operation instruction manual
• in case / box

• 3 V measuring system
• IP 54
• with digital LCD display
• display rotatable 0 - 330°
• measuring direction reversible
• mm/inch, TOL, ABS, zero, preset and on/off button
• clamp shank 8 h6

Order-No. WK.246.031

Dial indicator with digital display and absolute measuring system

• digital LCD display rotatable from 0 - 330
• with large reading digits 7 mm
• measuring range 12.7 mm
• digital reading 0.01 mm
• accuracy according to factory standard 10µ = 0.010 mm
• repeat accuracy 5µ = 0.005 mm
• measuring force ≥ 1.5 N
• outer Ø 60 mm
• dimension (L1) 56 mm, (L2) 126 mm
• On/off button (ON/OFF)
• ZERO / ABS button
• PRESET button (measured value presetting)
• + / - button (setting button)
• TOL button (tolerance setting button)
• measuring direction reversible
• Zero setting possible at any position
• MM-INCH toggle button
• ORIGIN button
• no measuring speed limitation
• clamping shaft Ø 8 h6
• with button cell CR 2032 voltage 3V (measuring system 3V)
• with data output RS 232 (RB 6)
• with operating instructions
• in case or box
• including a calibration certificate (English and German) from an international calibration laboratory !
  (The calibration certificate may be dated up to 8 weeks earlier than the date of sale)