Digital Three-Point Inside Micrometer

• Digital three-point measuring micrometer centering self and aligning self
• digital three-point inside micrometer set with exchangeable measuring heads
  for blind hole bore suitable (dimension C)
• drum and sleeve satin chrome finished
• with carbide measuring faces
• reading 0,001 mm
• complete measuring range 50 - 75 mm with one digital head and two measuring heads
  for a digital three-point internal micrometer
  measuring range 50 - 63 mm, dimension (C) 0,5 mm, (L) 67 mm
  measuring range 62 - 75 mm, dimension (C) 0,5 mm, (L) 67 mm
• accuracy 0,005 mm ( at full contact of the measuring faces !! )
• ON / OFF button
• Zeroing in any position
• switchable mm/inch
• ABS button (Absolute measurement / Relative measurement)
• Hold function (measured data can be kept)
• Preset function (setting a numerical value)
• with button cell LR44 1,5V
• with data output (RB 4)
• with setting ring gauge Ø 62 mm
• with extension, length 150 Ø 21,8 mm for measuring deep bores
• with setting
• Ident number
• operation instructions
• in case / box

• Digital three-point measuring micrometer centering self and aligning self
• digital three-point inside micrometer set with exchangeable measuring heads
  for blind hole bore suitable (dimension C)
• drum and sleeve satin chrome finished
• with carbide measuring faces
• reading 0,001 mm
• complete measuring range 75 - 100 mm with one digital head and two measuring heads
  for a digital three-point internal micrometer
  measuring range 75 - 88 mm, dimension (C) 0,5 mm, (L) 67 mm
  measuring range 87 - 100 mm, dimension (C) 0,5 mm, (L) 67 mm
• accuracy 0,005 mm ( at full contact of the measuring faces !! )
• ON / OFF button
• Zeroing in any position
• switchable mm/inch
• ABS button (Absolute measurement / Relative measurement)
• Hold function (measured data can be kept)
• Preset function (setting a numerical value)
• with button cell LR44 1,5V
• with data output (RB 4)
• with setting ring gauge Ø 87 mm
• with extension, length 150 Ø 21,8 mm for measuring deep bores
• with setting
• Ident number
• operation instructions
• in case / box

• Digital three-point internal measuring instrument
• Digital three-point inside micrometer with pistol grip and digital dial indicator in set 6-12 mm
  for suitable blind hole bore (dimension A)
• Total measuring range 6 - 12 mm with a pistol grip (with digital dial indicator) and three interchangeable
  measuring range head 6-8 mm, dimension (A) 1,5 mm and (L) 50 mm
  measuring range head 8-10 mm, dimension (A) 1,5 mm and (L) 50 mm
  measuring range head 10-12 mm, dimension (A) 1,5 mm and (L) 50 mm
• accuracy 0,009 mm ( at full contact of the measuring faces !! )
• with digital dial indicator
  measuring range 12,7 mm
  display rotatable
  reading 0,001 mm or 0,00005"
  measuring direction reversible
  clamp shank 8 h6
• with setting ring Ø 8 mm and Ø 10 mm
• with extension, length 100 mm for measuring deeper bores
• operation instructions
• Delivery:
  - Pistol grip
  - with the measuring heads above
  - with setting ring gauge and extension
  - with digital dial indicator
• in case / box

• Digital three-point internal measuring instrument
• Digital three-point inside micrometer with pistol grip and digital dial indicator in set 12-20 mm
  for suitable blind hole bore (dimension A)
• measuring faces carbide tipped
• Total measuring range 12 - 20 mm with a pistol grip (with digital dial indicator) and two interchangeable measuring range head 12-16 mm, dimension (A) 0,5 mm and (L) 65 mm
  measuring range head 16-20 mm, dimension (A) 0,5 mm and (L) 65 mm
• accuracy 0,009 mm ( at full contact of the measuring faces !! )
• with digital dial indicator
  measuring range 12,7 mm
  display rotatable
  reading 0,001 mm or 0,00005"
  measuring direction reversible
  clamp shank 8 h6
• with setting ring Ø 16 mm
• with extension, length 150 mm for measuring deeper bores
• operation instructions
• Delivery:
  - Pistol grip
  - with the measuring heads above
  - with setting ring gauge and extension
  - with digital dial indicator
• in case / box

• Digital three-point internal measuring instrument
• Digital three-point inside micrometer with pistol grip and digital dial indicator in set 20-30 mm
  for suitable blind hole bore (dimension A)
• measuring faces carbide tipped
• Total measuring range 20 - 30 mm with a pistol grip (without digital dial indicator) and two interchangeable measuring range head 20-25 mm, dimension (A) 0,5 mm and (L) 91 mm
  measuring range head 25-30 mm, dimension (A) 0,5 mm and (L) 91 mm
• accuracy 0,009 mm ( at full contact of the measuring faces !! )
• with digital dial indicator
  measuring range 12,7 mm
  display rotatable
  reading 0,001 mm or 0,00005"
  measuring direction reversible
  clamp shank 8 h6
• with setting ring Ø 25 mm
• with extension, length 150 mm for measuring deeper bores
• operation instructions
• Delivery:
  - Pistol grip
  - with the measuring heads above
  - with setting ring gauge and extension
  - without digital dial indicator
• in case / box

• Digital three-point internal measuring instrument
• Digital three-point inside micrometer with pistol grip and digital dial indicator in set 30-50 mm
  for suitable blind hole bore (dimension A)
• measuring faces carbide tipped
• Total measuring range 30 - 50 mm with a pistol grip (without digital dial indicator) and two interchangeable measuring range head 30-40 mm, dimension (A) 0,5 mm and (L) 97 mm
  measuring range head 40-50 mm, dimension (A) 0,5 mm and (L) 97 mm
• accuracy 0,009 mm ( at full contact of the measuring faces !! )
• with digital dial indicator
  measuring range 12,7 mm
  display rotatable
  reading 0,001 mm or 0,00005"
  measuring direction reversible
  clamp shank 8 h6
• with setting ring Ø 40 mm
• with extension, length 150 mm for measuring deeper bores
• operation instructions
• Delivery:
  - Pistol grip
  - with the measuring heads above
  - with setting ring gauge and extension
  - without digital dial indicator
• in case / box

• Digital three-point internal measuring instrument
• Digital three-point inside micrometer with pistol grip and digital dial indicator in set 50-100 mm
  for suitable blind hole bore (dimension A)
• measuring faces carbide tipped
• Total measuring range 50 - 100 mm with a pistol grip (without digital dial indicator) and four interchangeable measuring range head 50-63 mm, dimension (A) 0,5 mm and (L) 112 mm
  measuring range head 63-75 mm, dimension (A) 0,5 mm and (L) 112 mm
  measuring range head 75-88 mm, dimension (A) 0,5 mm and (L) 112 mm
  measuring range head 87-100 mm, dimension (A) 0,5 mm and (L) 112 mm
• accuracy 0,009 mm ( at full contact of the measuring faces !! )
• with digital dial indicator
  measuring range 12,7 mm
  display rotatable
  reading 0,001 mm or 0,00005"
  measuring direction reversible
  clamp shank 8 h6
• with setting ring gauge Ø 62 mm and Ø 87 mm
• with extension, length 150 mm for measuring deeper bores
• operation instructions
• Delivery:
  - Pistol grip
  - with the measuring heads above
  - with setting ring gauge and extension
  - without digital dial indicator
• in case / box

Order-No. 293.008.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 6 - 8 mm
• distance to ground (C) 1,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,004 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 8 mm
• with extension, length 100 Ø 5,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.010.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 8 - 10 mm
• distance to ground (C) 1,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,004 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 8 mm
• with extension, length 100 Ø 5,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.012.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 10 - 12 mm
• distance to ground (C) 1,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,004 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 10 mm
• with extension, length 100 Ø 5,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.016.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 12 - 16 mm
• distance to ground (C) 0,5 mm
• dimension (A) 80 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 12 mm
• with extension, length 150 Ø 11,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.020.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 16 - 20 mm
• distance to ground (C) 0,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 16 mm
• with extension, length 150 Ø 11,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.025.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 20 - 25 mm
• distance to ground (C) 0,5 mm
• dimension (A) 90 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 25 mm
• with extension, length 150 Ø 15,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.030.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 25 - 30 mm
• distance to ground (C) 0,5 mm
• dimension (A) 90 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 25 mm
• with extension, length 150 Ø 15,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.040.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 30 - 40 mm
• distance to ground (C) 0,5 mm
• dimension (A) 105 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 40 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.050.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 40 - 50 mm
• distance to ground (C) 0,5 mm
• dimension (A) 105 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 40 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.063.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 50 - 63 mm
• distance to ground (C) 0,5 mm
• dimension (A) 127 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 62 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.075.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 62 - 75 mm
• distance to ground (C) 0,5 mm
• dimension (A) 127 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 62 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.088.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 75 - 88 mm
• distance to ground (C) 0,5 mm
• dimension (A) 127 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 87 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.100.IP65

Digital internal micrometer with 3 points. The digital three-point internal micrometer is self-centring and self-aligning
and is ideal for measurements on blind bores, see dimension C in the drawing of the internal micrometer.

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• measuring range 87 - 100 mm
• distance to ground (C) 0,5 mm
• dimension (A) 127 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 87 mm
• with extension, length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.512.IP65

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• total measuring range 6 - 12 mm with three individual digital three-point internal micrometers divided into:
  measuring range 6 - 8 mm, dimension = (C) 1,5 mm and (A) 55 mm
  measuring range 8 - 10 mm, dimension = (C) 1,5 mm and (A) 55 mm
  measuring range 10 - 12 mm, dimension = (C) 1,5 mm and (A) 55 mm
• distance to ground (C) 1,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,004 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 8 + Ø 10 mm
• with one extension length 100 Ø 5,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.520.IP65

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• total measuring range 12 - 20 mm with two individual digital three-point internal micrometers divided into:
  measuring range 12 - 16 mm, dimension = (C) 0,5 mm and (A) 80 mm
  measuring range 16 - 20 mm, dimension = (C) 0,5 mm and (A) 80 mm
• distance to ground (C) 1,5 mm
• dimension (A) 55 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 16 mm
• with one extension length 150 Ø 11,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.550.IP65

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• total measuring range 20 - 50 mm with four individual digital three-point internal micrometers divided into:
  measuring range 20 - 25 mm, dimension = (C) 0,5 mm and (A) 90 mm
  measuring range 25 - 30 mm, dimension = (C) 0,5 mm and (A) 90 mm
  measuring range 30 - 40 mm, dimension = (C) 0,5 mm and (A) 105 mm
  measuring range 40 - 50 mm, dimension = (C) 0,5 mm and (A) 105 mm
• distance to ground (C) 0,5 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 25 + Ø 40 mm
• with one extension length 150 Ø 15,8 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box

Order-No. 293.600.IP65

• IP65 protection class (water + dust)
• with large digital LCD display and readings
• digital reading 0,001 mm or 0,00005"
• total measuring range 50 - 100 mm with four individual digital three-point internal micrometers divided into:
  measuring range 50 - 63 mm, dimension = (C) 0,5 mm and (A) 127 mm
  measuring range 62 - 75 mm, dimension = (C) 0,5 mm and (A) 127 mm
  measuring range 75 - 88 mm, dimension = (C) 0,5 mm and (A) 127 mm
  measuring range 87 - 100 mm, dimension = (C) 0,5 mm and (A) 127 mm
• distance to ground (C) 0,5 mm
• accuracy according to DIN 863 = 0,005 mm ( at full contact of the measuring faces !! )
• ON / CAL button
• Zeroing (reset) in any position
• switchable mm/inch
• Preset function (setting a numerical value)
• Hold function (measured data can be kept)
• with button cell CR 2032 voltage 3V
• with data output (RB 6)
• with setting ring gauge Ø 62 + Ø 87 mm
• with one extension length 150 Ø 23,5 mm for measuring deeper holes
• with key and screwdriver
• Identification number
• with instruction manual
• in case / box