Order-No. WK.246.031
Dial indicator with digital display and absolute measuring system
- digital LCD display rotatable from 0 - 330
- with large reading digits 7 mm
- measuring range 12.7 mm
- digital reading 0.01 mm
- accuracy according to factory standard 10µ = 0.010 mm
- repeat accuracy 5µ = 0.005 mm
- measuring force ≥ 1.5 N
- outer Ø 60 mm
- dimension (L1) 56 mm, (L2) 126 mm
- On/off button (ON/OFF)
- ZERO / ABS button
- PRESET button (measured value presetting)
- + / - button (setting button)
- TOL button (tolerance setting button)
- measuring direction reversible
- Zero setting possible at any position
- MM-INCH toggle button
- ORIGIN button
- no measuring speed limitation
- clamping shaft Ø 8 h6
- with button cell CR 2032 voltage 3V (measuring system 3V)
- with data output RS 232 (RB 6)
- with operating instructions
- in case or box
- including a calibration certificate (English and German) from an international calibration laboratory !
(The calibration certificate may be dated up to 8 weeks earlier than the date of sale)
The following measurement methods are possible:
1. preset measurement (measurement with initial value)
2. absolute measurement
3. relative measurement
4. tolerance measurement (measurements with tolerances)
Optionally available for this digital dial gauge:
Article no. 246.036 Wire lifter with locking screw, stroke approx. 20 mm
Article no. 246.037 Lifting lever (lifting device) !!
